Fancoil Silence - two-pipe version - IVAR.EGWW 15 – SPECIAL OFFER
Code: I07009585Related products
Product detailed description
Heating and cooling with one unit
IVAR.EGWW 15 is the largest type of wall-mounted fancoils from SILENCE. Water from the heating or cooling circuit flows through a heat exchanger made of copper tubes with aluminum fins, and a fan with a DC motor distributes the conditioned air into the room. At medium speed, the unit delivers 4.10 kW of heat (range 3.50–4.50 kW) or 3.70 kW of cooling (3.10–4.10 kW), including 2.85 kW of sensible and 0.85 kW of latent power.
Equipment
- cover made of self-extinguishing plastic and status display directly on the unit
- fan with three speeds and automatic mode
- control electronics with microprocessor, activated carbon filter, air vent
- infrared remote control – cooling, dehumidification, ventilation, heating, timer, night mode, and louver setting (SWING)
- 230 V output for controlling the water motor valve
Installation and accessories
The fancoil is mounted on the wall, with the heat exchanger connected standardly from the left side (water 1/2", condensate drain 5/8"). It comes electrically connected with a supply cable of length 1.6 m; electrical and hydraulic connections must be carried out by a qualified person. The water temperature in the heat exchanger must not exceed 60 °C. A cable wall controller IVAR.OPTIONAL (I07917620) can be added to the unit, as well as an installation box IVAR.INST (I07000584) for preparing conduits in the wall.
Conditions for measuring performance: cooling at room temperature 27 °C and incoming water temperature 7 °C, heating at 20 °C and incoming water temperature 45 °C, always with a water temperature difference of 5 K.
Technical parameters
| Code | I07009585 |
| Manufacturer | IVAR |
| Type | IVAR.EGWW 15 |
| Mounting | wall-mounted, two-pipe |
| Heating capacity (medium speed) | 4.10 kW (3.50–4.50 kW) |
| Cooling capacity total (medium speed) | 3.70 kW (3.10–4.10 kW) |
| Airflow (medium speed) | 700 m³/h (600–850 m³/h) |
| Sound pressure level (medium speed, 2.5 m) | 44 dB(A) |
| Power supply | 230 V / 1 ph / 50 Hz |
| Maximum power consumption | 60 W |
| Maximum operating pressure | 16 bar |
| Water / condensate connection | 1/2" / 5/8" |
| Dimensions (w × h × d) | 940 × 298 × 200 mm |
| Net weight | 12 kg |
Frequently asked questions
Can the IVAR.EGWW 15 fancoil both heat and cool?
Yes, depending on the water supplied to it, the room will be heated or cooled. At medium speed, it provides 4.10 kW of heat at 45 °C water or 3.70 kW of cooling at 7 °C water.
What is the maximum allowable water temperature in the heat exchanger?
The water temperature in the heat exchanger must not exceed 60 °C. The maximum operating pressure is 16 bar.
What accessories can be added to the fancoil?
A cable wall controller IVAR.OPTIONAL (I07917620) can be added to the unit, as well as an installation box IVAR.INST (I07000584) for preparing conduits in the wall.
Additional parameters
| Category: | IVAR.EGWW - Fan Coil Silence |
|---|---|
| Warranty: | 2 years |
| Weight: | 12 kg |
| Availability: | In stock or at supplier |
| Code: | I07009585 |
| Manufacturer: | IVAR |
| Type: | IVAR.EGWW 15 |
| Version: | wall-mounted, two-pipe |
| Heating capacity (medium speed): | 4.10 kW (3.50–4.50 kW) |
| Total cooling capacity (medium speed): | 3.70 kW (3.10–4.10 kW) |
| Airflow (medium speed): | 700 m³/h (600–850 m³/h) |
| Sound pressure (medium speed, 2.5 m): | 44 dB(A) |
| Power supply: | 230 V / 1 ph / 50 Hz |
| Max. power input: | 60 W |
| Max. operating pressure: | 16 bar |
| Water / condensate connection: | 1/2" / 5/8" |
| Dimensions (W × H × D): | 940 × 298 × 200 mm |
| Net weight: | 12 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.