FASTEC fitting reducing tee IVAR.RF 07 – FASTEC Quick F13, F x F x M
Code: RF12310100Related products
Product detailed description
Branch with one male end
The IVAR.RF 07 tee (code RF12310100) splits the hot or cold water line of the FASTEC system in two directions. Two branches have an F13 female connection, while the third is male (M) and links to a component with a female connection. The version with three female connections is the IVAR.RF 08 tee.
Tool-free joint
The connections are FASTEC Quick F13 size. The joint is secured by pushing the locking pin into the locking groove, and once the pin is pulled out it can be taken apart again. ALPEX pipes are connected to the system via FASTEC connection fittings, which are pressed with B, F, TH, U or H jaws.
Technical data
- design: female / female / male (F x F x M)
- max. operating pressure: PN 16
- operating temperature: −30 °C to +95 °C
- material: brass, EPDM O-ring
The FASTEC Quick system has been used in sanitary installations since 2001. We recommend having the installation carried out by a plumber.
Technical data
| Code | RF12310100 |
| Manufacturer | IVAR |
| Type | IVAR.RF 07 |
| Product type | reducing tee |
| Connection design | female / female / male (F x F x M) |
| Connection size | FASTEC Quick F13 |
| Max. operating pressure | PN 16 |
| Operating temperature | −30 to +95 °C |
| Material | brass, EPDM O-ring |
| Joint locking | locking pin, no tools |
Frequently asked questions
How does the IVAR.RF 07 tee differ from the IVAR.RF 08 tee?
IVAR.RF 07 has two female and one male connection (F x F x M), IVAR.RF 08 has three female connections (F x F x F). Both are used for branching the line.
How is the fitting joined to other FASTEC components?
The joint is secured by pushing the locking pin into the locking groove, without tools. Once the pin is pulled out, the joint can be taken apart.
What operating conditions can the fitting handle?
It is designed for pressures up to PN 16 and temperatures from −30 to +95 °C. It is made of brass with an EPDM O-ring.
Additional parameters
| Category: | accessories for water manifolds |
|---|---|
| Warranty: | 24 |
| Availability: | In stock or at supplier |
| Code: | RF12310100 |
| Manufacturer: | IVAR |
| Type: | IVAR.RF 07 |
| Product type: | reducing tee |
| Connection design: | female / female / male (F x F x M) |
| Connection size: | FASTEC Quick F13 |
| Max. operating pressure: | PN 16 |
| Operating temperature: | −30 to +95 °C |
| Material: | brass, EPDM O-ring |
| Joint locking: | locking pin, no tools |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.