Atmos DC0161 Combustion Chamber Side Brick

Product detailed description

Combustion chamber side brick 392 mm – pair

Under code DC0161, a pair of original ATMOS ceramic combustion chamber side bricks is sold, i.e. two pieces of part DC0166. They are intended for older boilers manufactured no later than 31 Dec 2016.

Gasket and sealant

The package does not include sealant or a combustion chamber gasket. The gasket with catalogue number S0950 belongs with these side bricks, and sealant V0345 can be used for sealing.

Boilers from 2017

From serial number 332868, i.e. from 1 Jan 2017, the DC0176 combustion chamber side brick is fitted in types DC20GS, GS20 and DC22GSE (GD).

Frequently asked questions

• How do I choose the right output for a solid fuel boiler? Base it on the calculated heat loss of the heated building, but with wood/coal boilers also consider that during a single load the boiler burns for several hours at essentially constant output - which is why it is common practice to add an accumulation tank to the boiler, which stores the excess heat for later use instead of the boiler having to be throttled down inefficiently.
• What else do I need to install this boiler? Besides the boiler itself, the system generally requires: an accumulation (buffer) tank of suitable volume, a circulation pump (often already with a built-in Laddomat or a thermoregulating valve against low-temperature boiler corrosion), a safety valve, an expansion vessel and a flue/chimney with sufficient draught matching the boiler output - you will find the exact chimney draught values in the technical parameters above.
• What fuel is suitable and what is not? Use only the fuel recommended by the manufacturer for the given model (commonly log wood of defined length and moisture, or brown coal briquettes or coal depending on the boiler type) - unsuitable or overly moist fuel reduces efficiency, increases the formation of tar and deposits and can cause damage to the boiler.
• What about chimney inspection and legislation? Before the boiler is put into operation, and also regularly during its use (usually once a year for solid fuels), an inspection/cleaning of the chimney by an authorised chimney sweep is required by law - without the relevant inspection report, an insurance claim in the event of fire may also be disputed.
• How much maintenance does the boiler require? It usually includes regular removal of ashes and cleaning of the heating surfaces/flue gas passages of soot (interval depending on intensity of use, usually on the order of weeks), and once a year a thorough inspection including the gaskets and chimney.
• Can I install the boiler myself? The positioning and connection of the boiler to the heating system, chimney and safety devices should be carried out, or at least checked by a qualified heating technician - it is an appliance with an open fire, high temperatures and pressure components, where a mistake in connection can pose a safety risk.