Threaded rubber compensator 2" BRA.T8.510 for water and heating, stainless steel

Code: T8510050
Not rated Rating details
591,63 € / pcs 481 € excl. VAT Measure price:
International delivery
To order (1-2 weeks)

Detailed information

Product detailed description

The BRA.T8.510 rubber compensator with code T8510050 is the threaded version for 2" (DN 50) pipework, with an installation length of 200 mm. The elastic EPDM element is reinforced with nylon fabric, while the union, nut and counter-union are made of AISI 304 stainless steel.

Purpose

  • absorbs linear expansion and compression of the pipe, axial misalignment and angular deflection
  • reduces the transmission of vibration and noise along the pipework
  • mitigates the effects of water hammer

Operating data

  • maximum operating pressure PN 16; the permissible pressure decreases as temperature rises
  • medium temperature -10 °C to +100 °C
  • water and water-glycol mixtures up to 50 %, approved for drinking water
  • threads to ISO 228-1
  • for 2": compression 22 mm, extension 6 mm, lateral offset 22 mm, angular movement 20°

The compensator is not suitable for steam, hazardous gases and liquids, oils and hydrocarbons, or for vacuum. It is installed stress-free at its unloaded length using a suitable spanner on the hexagons; it must not be welded and must be protected from sparks and direct sunlight. It is maintenance-free. The BRA.T8.510 series is available in sizes from 1/2" to 3".

Technical data

CodeT8510050
BrandIVAR
TypeBRA.T8.510
Connection2" female thread (F/F)
Installation length200 mm
Maximum operating pressurePN 16
Operating temperature-10 °C to +100 °C
Union materialAISI 304 stainless steel
Elastic elementnylon-reinforced EPDM
Mediumwater, water-glycol mixture up to 50 %
Weight2.75 kg

Frequently asked questions

Which systems is the compensator suitable for?
For water lines including drinking water, heating and air-conditioning systems, and for water-glycol mixtures up to 50 %. It is not used for steam, oils, hydrocarbons or hazardous gases and liquids.

What pipe movements can it absorb?
In the 2" size up to 22 mm compression, 6 mm extension, 22 mm lateral offset and 20° angular deflection. These values must not be exceeded.

Does the compensator need maintenance?
No, it is maintenance-free. What matters is stress-free installation at its unloaded length and protection from direct sunlight.

Additional parameters

Category: BRA.T8.500 - rubber expansion joint - threaded
Warranty: 2 years
Weight: 2.75 kg
Code: T8510050
Brand: IVAR
Type: BRA.T8.510
Connection: 2" female thread (F/F)
Installation length: 200 mm
Maximum operating pressure: PN 16
Operating temperature: -10 °C to +100 °C
Union material: AISI 304 stainless steel
Elastic element: nylon-reinforced EPDM
Medium: water, water-glycol mixture up to 50 %
Weight: 2.75 kg

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.