Gypsum module - Front wall installation system for dry installation (into gypsum board), WITH TABLET DISPENSER

Product detailed description

Delivered with a WC tablet doser.

Application:
For wall-hung WC
For installation in front of a load-bearing wall or into a gypsum board construction
For floor thickness 0-200 mm
For installation of a wall-hung WC with connection spacing 180 mm or 230 mm

Features:
Adjustable pivoting feet with brake in the range of 0-200 mm
Sliding waste holder mechanism in eight positions at a distance of 0-93 mm
Corner valve with the possibility to connect to the Mepla piping system
Frame construction allows anchoring to a separate, sufficiently load-bearing gypsum board partition or in front of a load-bearing wall
The installed module is covered with gypsum board and no additional reinforcing or anchoring elements are required
Construction of polystyrene insulation prevents condensation on the surface of the cistern and dampens the transfer of vibrations from the cistern to the building structure
Preparation for connection of a holder with DG 1/2" transition for bidet seats and sprays
Dual flushing, independently adjustable with a hygiene reserve
Possibility to install remote or sensor flushing
Compatible with all Alcaplast control buttons
Service work without the use of tools
Water supply from the back / from the top in the middle
The cistern is made from one piece, ensuring 100% watertightness
Service hatch cover simplifies installation and prevents the penetration of moisture and dirt
Mounting depth adjustable in the range of 20-95 mm
Construction depth 125 mm
Material of the load-bearing structure: metal with a powder-coated paint

Scope of delivery:
Self-supporting frame
Water connection 1/2" with integrated corner valve Schell 1/2-3/8"
Mechanism bracket 2 pcs
Fixing set: screw M8x60 - 4 pcs, wall plug M12 - 4 pcs
Fixing material for securing the WC bowl: threaded rod M12 - 2 pcs, washers - 4 pcs, cap - 2 pcs, nut - 2 pcs, thread protector - 2 pcs
Waste elbow HT90/110 polyethylene, PE-HD
Supply sealing, outlet polypropylene, V-rubber insert
Waste sealing, coupling polypropylene, coupling sealing
Set of installation caps for protection of connection openings during system installation
Service hatch cover easily cuttable

Technical parameters:
Water connection from the back or from the top through mounting holes G1/2"
Operating pressure range 0.05-0.8 MPa
Recommended pressure range 0.3-0.5 MPa
Large flush 6-9 l
Small flush 2.5-3.5 l
Standard setting for large flush 6 l
Standard setting for small flush 3 l
Hygiene reserve 3 l
Water volume in the cistern 9 l