HAKL PL SET 5.5kW water heater with built-in bath unit, 20 cm

Product detailed description

BASIC FEATURES

• mounting on HAKL pressureless taps
• pressureless operation at 0 bar with switching from 0.9 bar
li>hydraulic switching of microswitch
• connection to 230V, at 3.5kW directly into the socket
• immediate and continuous water heating up to 43 °C
• one power stage of the heating coil
• mechanical protection against coil burnout
• hydraulic protection against overheating of the heating system

PRODUCT DESCRIPTION

The flow water heater HAKL PL is automatically put into operation by turning the hot water tap on the tap. The heater has no built-in tank, it heats the water immediately and continuously, and electricity is consumed only when hot water is running. A red light on the front cover indicates the heater is switched on.
Due to its design and dimensions, it is intended for only one point of use, for example, on a kitchen sink or washbasin. Installation is possible only on a special HAKL pressureless tap. These taps, when the hot or cold water tap is closed, disconnect the heater from the water pressure in the plumbing system. This means the heater is not constantly subjected to water pressure, which extends its lifespan. A wide range of taps is supplied with accessories (gaskets, reducers, heater bracket...) which allow easy, convenient and quick installation. The flow heater is mechanically protected against coil burnout and overall overheating of the heating system is prevented by hydraulic protection.

SET - HEATER WITH TAP

For easier purchase, the electric flow water heater HAKL PL SET is supplied together with a HAKL pressureless classic stand tap with an outlet arm length of 22 cm.
The package includes a 3/8" gasket and a water-saving aerator, which even at low flow rates sufficiently aerates the water and thus visually increases its volume.

TABLE OF SUITABILITY FOR USE