Hornisse electric heating cable for underfloor, 3.6 mm, length 105.6 m

Product detailed description

The two-core heating cable Hornisse with a diameter of 3.1–3.6 mm is designed for floor heating with screed. This item from the HO Cable/18 range has a heating length of 105.6 m and a power of 1900 W at 230 V, with a linear power of 18 W/m. The cable ensures even floor heating and eliminates cold spots in residential and commercial spaces.

• Installation in screed – the cable is laid directly on the concrete screed and covered, for example, with tiles, panels or stone.
• Energy efficiency – with precise temperature control and high thermal efficiency, heating costs can be reduced.
• Even heat distribution across the entire floor surface without cold spots.
• Easy installation – the cable is flexible and can be laid in hard-to-reach areas. It is suitable for residential and commercial buildings, for heating entire rooms, bathrooms or kitchens, and also as an additional heat source.
• Durability – fluoropolymer and PVC insulation protect against mechanical damage and environmental influences; the cable is also protected against moisture, which extends its service life.
• Fast heating – the desired room temperature is reached quickly.
• Safe operation – shielding and high-quality insulation reduce the risk of cable overheating.

Parameters of this cable

The designation 18-1900 in the index expresses the cable's power: with 18 W/m and a length of 105.6 m, it results in a power of 1900 W. It is one of the longest cables in the range, with lengths ranging from 83.3 m to 127.5 m. When selecting, ensure that the power and length match the planned cable layout in the floor.

Technical data

Other lengths in the HO Cable/18 range

The range includes cables with the same linear power of 18 W/m, differing in length and total power. This item is highlighted in the table.

Application and installation

The cable is suitable for the following areas:

• floor heating in family homes and apartments,
• heating of commercial spaces, for example offices or service areas,
• areas where additional heat is needed – near windows, balcony doors or in bathrooms.

During installation, the cable must not be twisted; observe the specified bending radius of 50 mm and ensure that loops do not overlap when laying. It can be installed at temperatures from 5 °C. Connect the 2.5 m long supply cable via a thermostat; always entrust the electrical connection to a qualified electrician. After installation, we recommend measuring the resistance of the heating cable and comparing it with the documentation.

Common questions

What power and length does this heating cable have?

The cable with index HO Cable/18-1900 has a length of 105.6 m and a power of 1900 W at a linear power of 18 W/m and a voltage of 230 V.

At what temperature can the cable be installed?

The minimum installation temperature is 5 °C.

Is the cable resistant to moisture?

Yes, the cable is protected against moisture and has a fluoropolymer core insulation with an outer PVC sheath.