Hornisse electric heating cable for floor, 3.6 mm, length 22.2 m

Product detailed description

Hornisse HO Cable/18-400 is a two-core heating cable for screed floors. Its heating section is 22.2 m long and at 230 V it provides a power of 400 W, with each meter of cable heating 18 W. The cable is coated with fluoropolymer and PVC insulation and ensures even heat distribution, eliminating cold spots in the room.

• Installation in screed – the cable is laid directly on the concrete screed and covered, for example, with tiles, panels or stone.
• Energy efficiency – with precise temperature control and high thermal efficiency, heating costs can be reduced.
• Even heat distribution across the entire floor surface without cold spots.
• Easy installation – the cable is flexible and can be laid in hard-to-reach areas. It is suitable for both residential and commercial buildings, for heating entire rooms, bathrooms or kitchens, as well as for use as an additional heat source.
• Durability – fluoropolymer and PVC insulation protect against mechanical damage and environmental influences; the cable is also protected against moisture, which extends its service life.
• Quick heating – the desired room temperature is reached quickly.
• Safe operation – shielding and high-quality insulation reduce the risk of cable overheating.

Parameters of this cable

In this case, it is the second shortest length in the range: 22.2 m at 18 W/m corresponds to a power of 400 W, which is also recorded in the index 18-400. The cable is suitable for smaller floor areas and where additional heating is needed to supplement another heat source.

Technical data

Other lengths in the HO Cable/18 series

The series includes cables with the same specific power of 18 W/m, differing in length and total power. This item is highlighted in the table.

Application and installation

The cable is suitable for the following areas:

• floor heating in houses and apartments,
• heating of commercial spaces, for example offices or service areas,
• areas where additional heat is needed – near windows, balcony doors or in the bathroom.

During installation, the cable must not be twisted; observe the specified bending radius of 50 mm and when laying, ensure that loops do not overlap. It can be installed at a temperature of at least 5 °C. Connect the 2.5 m long supply cable via a thermostat; always entrust the electrical connection to a qualified electrician. After installation, we recommend measuring the resistance of the heating cable and comparing it with the documentation.

Frequently asked questions

What power does a cable of length 22.2 m have?

The HO Cable/18-400 cable has a power of 400 W at 18 W/m and 230 V.

What materials is the cable made of?

The core has fluoropolymer insulation and the outer sheath is made of PVC. The cable is two-core.

What is the minimum temperature limit for installation?

The cable should be installed at a temperature of at least 5 °C.