Hydraulic separator for a horizontal distribution manifold IVAR.HS 325
Code: IVA49043694Product detailed description
The IVAR.HS 325 separator (IVA49043694) hydraulically balances the dynamic pressures between the primary and secondary circuits when the system has several heat sources or several heating circuits. It is intended for the IVAR.HC-DN 65 horizontal manifold. The separating deflector provides water stratification, air and dirt separation and sludge settling; the low velocity in the main chamber limits mixing of the heating water.
Technical data
- Max. output (at ΔT 20 K): 1 600 kW
- Max. flow: 70 000 l/h
- Separator diameter: 325 mm
- Max. operating pressure: 10 bar
- Max. operating temperature: 100 °C
- Thermal insulation: Trocellen C080 RN2, thickness 30 mm
- Material: steel Fe EN 10217-1
The unit is meant for closed heating and cooling circuits and comes with the body and thermal insulation. The floor support, counter flanges and bolt set are ordered separately. Have the installation and commissioning carried out by a qualified contractor.
Technical data
| Code | IVA49043694 |
| Manufacturer | IVAR |
| Type | IVAR.HS 325 |
| Max. output (at ΔT 20 K) | 1 600 kW |
| Max. flow | 70 000 l/h |
| Separator diameter | 325 mm |
| Max. operating pressure | 10 bar |
| Max. operating temperature | 100 °C |
| Thermal insulation | Trocellen C080 RN2, thickness 30 mm |
| Material | steel Fe EN 10217-1 |
Frequently asked questions
What output and flow can the separator handle?
Up to 1 600 kW at ΔT 20 K and 70 000 l/h; the maximum operating pressure is 10 bar and the temperature +100 °C.
Which manifold is the separator used with?
It is intended for the IVAR.HC-DN 65 horizontal manifold (DN 65 according to the product name).
Additional parameters
| Category: | hydraulic separators |
|---|---|
| Warranty: | 2 years |
| Code: | IVA49043694 |
| Manufacturer: | IVAR |
| Type: | IVAR.HS 325 |
| Max. output (at ΔT 20 K): | 1 600 kW |
| Max. flow: | 70 000 l/h |
| Separator diameter: | 325 mm |
| Max. operating pressure: | 10 bar |
| Max. operating temperature: | 100 °C |
| Thermal insulation: | Trocellen C080 RN2, thickness 30 mm |
| Material: | steel Fe EN 10217-1 |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
