Hydraulic separator VARIMIX IVAR.VAR 00, 6/4″ (550634)
Code: 550634Product detailed description
The IVAR.VAR 00 hydraulic separator (code 550634) is part of the modular VARIMIX system for heat sources, above all heat pumps used for heating and cooling.
It makes the source's primary circuit and the consumers' secondary circuit hydraulically independent, so the pumps do not disturb one another. It also separates air and traps magnetic dirt.
- Included: separator body, drain valve, magnetic filter, automatic air vent and EPP insulation
- Data: PN 6, up to +120 °C; flow up to 6000 l/h on the primary and 4000 l/h on the secondary side; two neodymium magnets of 2 × 12 000 gauss
- Connection: 6/4″ male × 6/4″ female with union nut; the separator can be connected to the IVAR.VAR 30 manifold from the right or the left
Any VARIMIX component can be fitted with a special contact insulation shell, which prevents condensation in cooling operation.
Technical data
| Code | 550634 |
| Manufacturer | IVAR |
| Type | IVAR.VAR 00 |
| Product type | hydraulic separator of the VARIMIX system |
| Connection | 6/4″ male × 6/4″ female, union nut |
| Max. operating pressure | PN 6 |
| Max. operating temperature | +120 °C |
| Max. flow, primary circuit | 6000 l/h |
| Max. flow, secondary circuit | 4000 l/h |
| Magnetic filter | 2 × 12 000 gauss (neodymium) |
| Material | brass, steel, EPP |
Frequently asked questions
What is the IVAR.VAR 00 hydraulic separator for?
It separates the heat source's primary circuit from the consumers' secondary circuit so that the pumps in both circuits do not affect each other. It also removes air and magnetic dirt.
Which side does the separator connect to the manifold from?
It can be connected to the IVAR.VAR 30 manifold from either the right or the left. The connection is 6/4″ with a union nut.
Additional parameters
| Category: | hydraulic separators |
|---|---|
| Warranty: | 2 years |
| Code: | 550634 |
| Manufacturer: | IVAR |
| Type: | IVAR.VAR 00 |
| Product type: | hydraulic separator of the VARIMIX system |
| Connection: | 6/4″ male × 6/4″ female, union nut |
| Max. operating pressure: | PN 6 |
| Max. operating temperature: | +120 °C |
| Max. flow, primary circuit: | 6000 l/h |
| Max. flow, secondary circuit: | 4000 l/h |
| Magnetic filter: | 2 × 12 000 gauss (neodymium) |
| Material: | brass, steel, EPP |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
