IVAR.FLO Installation Box for IVAR.SLI DC 400 Fan Coil – Vertical and Horizontal Mounting
Code: L00569IIRelated products
Product detailed description
The IVAR.FLO installation box (code L00569II) is the metal base structure for building the IVAR.SLI DC 400 fan coil into a wall or ceiling. The fan coil is fitted inside together with its support brackets and covered on the outside by a cover panel. The box is made of galvanised sheet metal and is suitable for both vertical and horizontal installation.
Mounting options
- vertically in a wall with a free horizontal outlet – opening 730 mm high, 142 mm deep and at least 940 mm long, which may also start at floor level; fixed to the wall with anchor bolts
- horizontally in a ceiling with a free vertical outlet – opening 142 mm high, 730 mm wide and at least 940 mm long; the box is screwed to the ceiling
- horizontally in a suspended ceiling with a ducted outlet – the box can be fixed directly to the soffit or suspended lower on spacer rods
Design and accessories
The external dimensions are 725 × 914 × 142 mm. The package includes 3 insulation panels to be placed in the upper inner section. Knock-outs allow the hydraulic and electrical connections to be brought in from the ceiling, wall or floor, for both left-hand and right-hand fan coil connection. The separate IVAR.FLC cover panel is used to close the box. Installation must be carried out by a qualified technician in accordance with the instructions for the box and the fan coil.
Technical data
| Code | L00569II |
| Brand | IVAR |
| Type | IVAR.FLO |
| For fan coil | IVAR.SLI DC 400 |
| Dimensions (height × length × depth) | 725 × 914 × 142 mm |
| Material | galvanised sheet metal |
| Mounting position | vertical (wall) and horizontal (ceiling) |
| Installation opening | 730 × min. 940 mm, depth 142 mm |
| Included | 3 insulation panels |
| Cover panel | IVAR.FLC (separate) |
Additional parameters
| Category: | IVAR:FDB2 - Inlet Intake Kit |
|---|---|
| Warranty: | 2 years |
| Code: | L00569II |
| Brand: | IVAR |
| Type: | IVAR.FLO |
| For fan coil: | IVAR.SLI DC 400 |
| Dimensions (height × length × depth): | 725 × 914 × 142 mm |
| Material: | galvanised sheet metal |
| Mounting position: | vertical (wall) and horizontal (ceiling) |
| Installation opening: | 730 × min. 940 mm, depth 142 mm |
| Included: | 3 insulation panels |
| Cover panel: | IVAR.FLC (separate) |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.