IR console IVAR.IR for ECI, ECI DC fan coils – remote control receiver – SALE
Code: I07916992Related products
Product detailed description
The IVAR.IR console (code I07916992) is an infrared receiver for ECI ceiling cassette fan coils. It is installed in the unit's grille and connected to its control board. Once fitted, all functions can be operated by remote control – temperature, fan speed and heating or cooling mode.
What you need with the console
- IVAR.DO IR infrared remote control (code I07916982)
- IVAR.LAS air temperature sensor (code I07916910, length 1 m) – connecting it is mandatory
Indicators
Two LEDs on the grille show the operating status: green in cooling, red in heating (steady once the set temperature is reached, flashing while running), yellow with an audible signal indicates an alarm.
Installation and connection may only be carried out by a qualified electrician.
Technical data
| Code | I07916992 |
| Manufacturer | IVAR |
| Type | IVAR.IR |
| Suitable for | ECI, ECI DC fan coils |
| Function | receives the remote control IR signal |
| Compatible remote control | IVAR.DO IR (I07916982) |
| Required sensor | IVAR.LAS (I07916910) |
| Indicators | 2 LEDs |
| Mounting | in the ECI fan coil grille |
Frequently asked questions
Is the remote control included with the console?
No, the IVAR.DO IR infrared remote control has its own code, I07916982. The IVAR.LAS room sensor must also be connected to the console.
Which fan coils is the console intended for?
For ECI ceiling cassette fan coils. The manufacturer's manual also lists a separate console code, I07916997, for ECI DC units, so please check the correct code for an ECI DC.
What range does the remote control have?
The IVAR.DO IR remote control has an infrared range of 8 to 10 m and sets the temperature between 10 and 30 °C.
Who can install the console?
Installation and connection to the control board may only be done by a qualified electrician, with the unit disconnected from the power supply.
Additional parameters
| Category: | Accessories for fancoil |
|---|---|
| Warranty: | 24 |
| Type: | controller / controls |
| Code: | I07916992 |
| Manufacturer: | IVAR |
| Type: | IVAR.IR |
| Suitable for: | ECI, ECI DC fan coils |
| Function: | receives the remote control IR signal |
| Compatible remote control: | IVAR.DO IR (I07916982) |
| Required sensor: | IVAR.LAS (I07916910) |
| Indicators: | 2 LEDs |
| Mounting: | in the ECI fan coil grille |
Product rating
Be the first who will post an article to this item!
Discussion
List of discussions
Enrico
ATRIASHOP.IT
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.