IVAR.2.0 12HPIN – Air Conditioner without Outdoor Unit – Cooling 2.33 kW, Heating 2.31 kW – Special Offer
Code: CBMO12IC3IIProduct detailed description
IVAR.2.0 12HPIN with code CBMO12IC3II is a monoblock type air conditioning unit – the compressor, both heat exchangers and fans are in one metal cabinet only 165 mm deep. The unit is mounted on an exterior wall from the interior and draws in and exhausts outside air through two wall openings, so no external unit is needed on the façade. The IVAR.2.0 series is manufactured by the Italian company INNOVA.
Performance and efficiency
- cooling 2.33 kW, with Dual Power up to 3.10 kW for faster attainment of the set temperature
- heating with heat pump 2.31 kW, with Dual Power up to 3.05 kW
- EER 3.25 and COP 3.28; energy class B for cooling and A for heating
- dehumidification up to 0.9 l in 24 hours
- rotary DC Inverter compressor
Installation
- on any exterior wall, low above the floor or high under the ceiling (in the latter case with a bottom aesthetic cover)
- two holes Ø 162 mm with a spacing of 293 mm, position according to the attached drilling template
- no condensate drain is needed for cooling; for heating operation, connect a drain Ø 20 mm
- only for interior use – protection class IPX0, not suitable for humid rooms, e.g., laundry rooms
Control
- remote control and touch display with button lock
- Wi-Fi app for Android, iOS and Windows (PC, tablet, smartphone)
- anti-frost protection in heating mode
Packaging and accessories
In the packaging you will find a remote control with a CR2025 battery, a wall mount, a drilling template, two self-closing external flaps, two air ducts into the openings, a sealing ring for the inner side of the wall, and screws with washers. Grilles with fixed vanes for the outer side of the wall can be ordered separately (code GB0738II); for ceiling installation, the bottom aesthetic cover GB0737II may be useful.
Cooling is possible at outside temperatures from -5 to 43 °C, the heat pump can heat down to -20 °C. The installation of the unit, drilling of the openings and electrical connection should be carried out by a qualified person.
Technical parameters
| Code | CBMO12IC3II |
| Brand | IVAR |
| Manufacturer | INNOVA (Italy) |
| Type | IVAR.2.0 12HPIN |
| Cooling capacity | 2.33 kW (Dual Power max. 3.10 kW, min. 0.92 kW) |
| Heating capacity | 2.31 kW (Dual Power max. 3.05 kW, min. 0.79 kW) |
| EER / COP | 3.25 / 3.28 |
| Energy class | cooling B / heating A |
| Refrigerant | R32, 500 g, GWP 675 |
| Power supply | 230 V / 50 Hz |
| Dimensions (W × H × D) | 1010 × 549 × 165 mm |
| Weight | 41 kg |
| Wall openings | 2 × Ø 162 mm, spacing 293 mm |
| Sound pressure | 27/41 dB(A) (min./max., 2 m) |
Frequently asked questions
Does this air conditioner need an external unit?
No. The entire device is in the indoor unit and it connects to the outside environment via only two wall openings with a diameter of 162 mm. From the outside, only flaps or grilles are visible.
Is it necessary to connect a condensate drain to the unit?
No condensate drain is needed for cooling. If you want to use the unit for heating, connect a drain to the outlet Ø 20 mm (hose Ø 16 mm).
Down to what outside temperature can it heat?
The heat pump can heat down to an outside temperature of -20 °C. Versions ELEC with an additional electric heater can operate down to -25 °C with the compressor turned off.
Can the unit hang high under the ceiling?
Yes, it can be installed low above the floor or high near the ceiling. In the case of higher installation, the unit is mounted with a bottom aesthetic cover (code GB0737II), which covers its bottom side.
Additional parameters
| Category: | air conditioning without outdoor unit |
|---|---|
| Warranty: | 2 years |
| Weight: | 41 kg |
| Availability: | In stock or at supplier |
| Code: | CBMO12IC3II |
| Brand: | IVAR |
| Manufacturer: | INNOVA (Italy) |
| Type: | IVAR.2.0 12HPIN |
| Cooling capacity: | 2.33 kW (Dual Power max. 3.10 kW, min. 0.92 kW) |
| Heating capacity: | 2.31 kW (Dual Power max. 3.05 kW, min. 0.79 kW) |
| EER / COP: | 3.25 / 3.28 |
| Energy class: | cooling B / heating A |
| Refrigerant: | R32, 500 g, GWP 675 |
| Power supply: | 230 V / 50 Hz |
| Dimensions (W × H × D): | 1010 × 549 × 165 mm |
| Weight: | 41 kg |
| Wall openings: | 2 × Ø 162 mm, 293 mm centres |
| Sound pressure: | 27/41 dB(A) (min./max., 2 m) |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.