IVAR.ELCU-10000 – underground plastic tank for drinking water and rainwater, 10000 l – SALE

Code: 1720563
Action
Not rated Rating details
8 848,62 € –53 %
IVAR.ELCU-10000 – podzemná plastová nádoba na pitnú aj dažďovú vodu, 10000 l – AKCIA
8 848,62 € –53 % 4 100,33 € / pcs 3 333,60 € excl. VAT Measure price:
International delivery
In stock at supplier

Detailed information

Product detailed description

The IVAR.ELCU-10000 (code 1720563) is an underground plastic tank with a capacity of 10000 litres, made as a self-supporting polyethylene monobloc. It is used to store drinking water or rainwater for later use and as a break tank for booster sets or ahead of further treatment of the water entering the building's pipework.

Design

  • LLDPE body with a diameter of 2130 mm, overall length of 3290 mm and body height of 2140 mm
  • LHDPE cover and Ø 700 mm inspection opening
  • material with hygiene certificate – it can be used for drinking water if the installation complies with the applicable regulations
  • temperature range −50 to +60 °C; liquids other than water only after consulting the supplier

No extension is included – a Ø 700 mm extension and an inlet cap for the ELCU-10000 are available separately.

Burying the tank

Before installation, the hydrogeological and morphological characteristics of the site must be assessed. The pit needs at least 30 cm of free space around the tank (50 cm in clay soil), must be at least 1 m from buildings and needs a sand bed at least 15 cm thick at the bottom. Backfill with sand in layers of 15–20 cm while gradually filling the tank with water. The backfill above the top of the tank must not exceed 80 cm; if the tank is buried 40 cm below ground, an extension on the inspection opening is recommended. Without a load-bearing reinforced concrete slab, vehicles must not pass closer than 2 m to the pit. Route the vent pipe above the highest point of the building. Installation must be carried out by a qualified technician.

Technical data

Code1720563
ManufacturerIVAR
TypeIVAR.ELCU-10000
Capacity10000 l
Installationunderground, self-supporting
MaterialLLDPE body, LHDPE cover
Tank diameter2130 mm
Overall length3290 mm
Body height2140 mm
Inspection openingØ 700 mm
Operating temperature−50 to +60 °C
Drinking watermaterial with hygiene certificate

Frequently asked questions

Is the ELCU-10000 tank suitable for drinking water?
The material has a hygiene certificate for drinking water, so the tank can be used for drinking water if the installation complies with the applicable regulations. It serves equally well for collecting rainwater.

How deep can the tank be buried?
The backfill above the top of the tank must not exceed 80 cm. If the tank is buried 40 cm below ground, an extension on the inspection opening is recommended; it is ordered separately.

Can a car drive over the tank?
With a standard installation, vehicles must not pass closer than 2 m to the pit. For a light (B125) or heavy (B400) driveway, a self-supporting reinforced concrete slab with an air gap of at least 10 cm must be built over the tank, designed by a specialist.

Additional parameters

Category: IVAR.ELCU - below-ground plastic tanks
Warranty: 2 years
Code: 1720563
Manufacturer: IVAR
Type: IVAR.ELCU-10000
Capacity: 10000 l
Installation: underground, self-supporting
Material: LLDPE body, LHDPE cover
Tank diameter: 2130 mm
Overall length: 3290 mm
Body height: 2140 mm
Inspection opening: Ø 700 mm
Operating temperature: −50 to +60 °C
Drinking water: material with hygiene certificate

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.