IVAR.H2Q CON Condensate Sump Pump – Automatic condensate pump for air conditioners and boilers, 230 V – SPECIAL OFFER
Code: CON.B306622Product detailed description
IVAR.H2Q CON (code CON.B306622) is a compact device that collects condensate from air conditioners, dehumidifiers, ovens, condensing boilers and similar appliances in a small container and automatically pumps it away using a pump. It is suitable for ceiling-mounted, freestanding and cassette-type air conditioning units.
How it works
Condensate flows into the box through one of two upper openings with an internal diameter of 25 mm. A float switch turns the pump on according to the water level, which pushes the condensate out through a built-in check valve into a drain hose with an internal diameter of 10 mm. A second, safety switch reports overflow – it activates a sound alarm or the air conditioner switch, which shuts down the unit, and this is done only at low voltage of class 2.
Technical data
- power supply 220–230 V, 50/60 Hz, power consumption 58/55 W
- max. pumping height 5.2 m at 50 Hz, 6.2 m at 60 Hz
- pumped liquid: clean water and condensate with temperature from 0 to +60 °C
- shaded pole motor, insulation class B, built-in thermal protection, stainless steel shaft, ball bearings
- impeller made of glass-fibre reinforced polyamide, housing made of ABS
- dimensions 280 × 125 × 140 mm, power cable 2 m
Installation
Cut the end of the inlet pipe at a 45° angle and leave it at least 10 mm above the bottom of the tank to prevent clogging; secure the drain hose with a clip. Before connecting the box, let the condensate from the air conditioner drain into a separate container several times to flush out any residual oil from the system. The box is not a submersible pump and is not suitable for use in swimming pools or coastal areas. It must be grounded and powered from a circuit with a protective conductor and a residual current device; installation and electrical connection must be carried out by a qualified person.
Technical parameters
| Code | CON.B306622 |
| Manufacturer | IVAR |
| Type | IVAR.H2Q CON |
| Power supply | 220–230 V, 50/60 Hz |
| Power consumption | 58/55 W (50/60 Hz) |
| Max. pumping height | 5.2 m (50 Hz) / 6.2 m (60 Hz) |
| Inlet | 2 openings, internal diameter 25 mm |
| Outlet | internal diameter 10 mm |
| Check valve | built-in |
| Liquid temperature | 0 to +60 °C |
| Dimensions | 280 × 125 × 140 mm |
| Motor protection | built-in thermal protection |
| Cable | 2 m |
Frequently asked questions
Can the H2Q CON be submerged in water?
No. It is a box with a built-in pump, not a submersible pump, and is not suitable for use in swimming pools or coastal areas. Condensate is supplied to it via a hose through the upper opening.
What is the safety switch for?
At too high a water level in the tank, it reports overflow. It activates a sound alarm or the air conditioner switch, which shuts down the unit, and this is done only at low voltage of class 2.
What should be done before connecting the box to the air conditioner?
Let the condensate from the air conditioner drain into a separate container several times to flush out any residual oil from the system. Then connect the inlet to the upper 25 mm opening and secure the 10 mm outlet with a clip.
What temperature of condensate can the box pump?
Clean water or condensate with a temperature from 0 to +60 °C. The max. pumping height is 5.2 m at 50 Hz.
Additional parameters
| Category: | other pumps and accessories |
|---|---|
| Warranty: | 2 years |
| Availability: | In stock or at supplier |
| Code: | CON.B306622 |
| Manufacturer: | IVAR |
| Type: | IVAR.H2Q CON |
| Power supply: | 220–230 V, 50/60 Hz |
| Power input: | 58/55 W (50/60 Hz) |
| Max. head: | 5.2 m (50 Hz) / 6.2 m (60 Hz) |
| Inlet: | 2 openings, inner diameter 25 mm |
| Outlet: | inner diameter 10 mm |
| Non-return valve: | built-in |
| Liquid temperature: | 0 to +60 °C |
| Dimensions: | 280 × 125 × 140 mm |
| Motor protection: | built-in thermal protection |
| Cable: | 2 m |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.