IVAR.OSMO SL 600 – wall-mounted fan coil unit, two-pipe version – SALE
Code: FAOL06SC1IIProduct detailed description
The IVAR.OSMO SL 600 is a wall-mounted two-pipe fan coil unit for heating and cooling indoor spaces. It is fixed vertically at any height on the wall, draws air in from the front and, thanks to its small depth, also fits where space is tight. The fan is driven by an energy-saving motor with DC Inverter technology.
Data for model SL 600
- heating output 3.02 kW (water 45/40 °C, air 20 °C)
- cooling output 2.81 kW (water 7/12 °C, air 27 °C)
- dimensions 1080 × 580 × 119 mm, weight 18.0 kg
- water volume of the heat exchanger 1.13 l, maximum operating pressure 10 bar
- hydraulic connection 3/4" EK, on the left side as standard
Control and maintenance
A remote control is included, but the controller (for example the IVAR.844 LCD control) has to be ordered separately. The air filter is easy to remove and clean. Water and electrical connections should be made by a qualified installer.
Technical data
| Code | FAOL06SC1II |
| Brand | IVAR |
| Type | IVAR.OSMO SL 600 |
| Dimensions (W × H × D) | 1080 × 580 × 119 mm |
| Weight | 18.0 kg |
| Heating output (water 45/40 °C) | 3.02 kW |
| Cooling output (water 7/12 °C) | 2.81 kW |
| Water volume of the heat exchanger | 1.13 l |
| Max. air flow | 438 m³/h |
| Max. operating pressure | 10 bar |
| Connection | 3/4" EK |
| Installation | wall-mounted, vertical |
Frequently asked questions
Do I need to buy a controller separately for the IVAR.OSMO SL 600 fan coil?
Yes. The remote control is supplied with the unit, but the controller, for example the IVAR.844 LCD control, must be ordered separately.
Where can the IVAR.OSMO SL 600 be installed?
Vertically on a wall at any height. The unit is only 119 mm deep and draws air in from the front.
Can it be used for both heating and cooling?
Yes, this is the two-pipe version. At the stated water and air temperatures it reaches 3.02 kW in heating and 2.81 kW in cooling.
Additional parameters
| Category: | Fan Coil Units - Devices |
|---|---|
| Warranty: | 2 years |
| Weight: | 18 kg |
| Code: | FAOL06SC1II |
| Brand: | IVAR |
| Type: | IVAR.OSMO SL 600 |
| Dimensions (W × H × D): | 1080 × 580 × 119 mm |
| Weight: | 18.0 kg |
| Heating output (water 45/40 °C): | 3.02 kW |
| Cooling output (water 7/12 °C): | 2.81 kW |
| Water volume of the heat exchanger: | 1.13 l |
| Max. air flow: | 438 m³/h |
| Max. operating pressure: | 10 bar |
| Connection: | 3/4" EK |
| Installation: | wall-mounted, vertical |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
