IVAR.S-300 DN 65 – unmixed boiler module DN 65, without pump
Code: IVA49043640Product detailed description
The IVAR.S-300 DN 65 is a boiler module for the direct distribution of heating water in radiator systems, charging hot water cylinders and charging and discharging buffer tanks. It is intended for closed water heating and cooling circuits and is mounted on horizontal distribution manifolds directly or via IVAR.LO reduction sets. This code is the version without a pump.
Data
- nominal size DN 65, connection centre distance 300 mm
- output up to 89 kW at ΔT 5 K and up to 356 kW at ΔT 20 K, maximum flow 15300 l/h
- PN 10, temperature up to +100 °C
- dimensions 940 × 660 × 477 mm
- Fe EN 10217-1 steel with epoxy powder paint, Trocellen C080 insulation 30 mm thick
Equipment
Flow and return pipes, 4 wafer-type shut-off butterfly valves, 0 – 120 °C thermometers, filling and drain valves, a check valve, 6 mm sensor pockets and pressure ports. Before commissioning, the manufacturer recommends flushing the system thoroughly; installation should be left to a qualified installer.
Technical data
| Code | IVA49043640 |
| Brand | IVAR |
| Type | IVAR.S-300 DN 65 |
| Nominal size | DN 65 |
| Connection centre distance | 300 mm |
| Output at ΔT 20 K | up to 356 kW |
| Output at ΔT 5 K | up to 89 kW |
| Max. flow | 15300 l/h |
| Max. operating pressure | 10 bar (PN 10) |
| Max. temperature | +100 °C |
| Dimensions (W × H × D) | 940 × 660 × 477 mm |
| Material | Fe EN 10217-1 steel, epoxy powder paint; Trocellen C080 insulation, 30 mm |
| Circulation pump | not included |
Frequently asked questions
Does the IVAR.S-300 DN 65 module with code IVA49043640 include a pump?
No, it is the version without a pump, prepared for a single or twin circulation pump. The version with the DAB EVOPLUS B 120/340.65 M pump has a separate code.
What is the module used for?
For the direct distribution of heating water, charging hot water cylinders and charging and discharging buffer tanks.
How is the module connected to the manifold?
It is mounted on horizontal distribution manifolds directly or via IVAR.LO reduction sets. The connection centre distance is 300 mm.
Additional parameters
| Category: | Boiler module - unmixed |
|---|---|
| Warranty: | 2 years |
| Code: | IVA49043640 |
| Brand: | IVAR |
| Type: | IVAR.S-300 DN 65 |
| Nominal size: | DN 65 |
| Connection centre distance: | 300 mm |
| Output at ΔT 20 K: | up to 356 kW |
| Output at ΔT 5 K: | up to 89 kW |
| Max. flow: | 15300 l/h |
| Max. operating pressure: | 10 bar (PN 10) |
| Max. temperature: | +100 °C |
| Dimensions (W × H × D): | 940 × 660 × 477 mm |
| Material: | Fe EN 10217-1 steel, epoxy powder paint; Trocellen C080 insulation, 30 mm |
| Circulation pump: | not included |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
