IVAR.SLW FILOMURO 400 – wall-mounted fan coil unit, two-pipe version, without control, DC Inverter – SALE
Code: F25001236MProduct detailed description
The IVAR.SLW FILOMURO 400 is a wall-mounted two-pipe fan coil unit for heating and cooling. It is mounted vertically, usually high on the wall, draws air in from the top and has a double heat exchanger with a quiet tangential fan driven by a DC Inverter motor. According to the official product name, this is the version without a control.
Data for model SLW 400
- heating output 1.50 kW (water 45/40 °C, air 20 °C)
- cooling output 1.24 kW (water 7/12 °C, air 27 °C)
- dimensions 815 × 335 × 128 mm, weight 14.0 kg
- water volume of the heat exchanger 0.50 l, maximum operating pressure 10 bar
- hydraulic connection 3/4" EK, always on the right (on the left on request)
- max. air flow 228 m³/h, supply 230 V, max. power consumption 19 W
The air filter is easy to remove and clean. The built-in version of the FILOMURO fan coils (BUILT IN IVAR.SWI) is available on request. Hydraulic and electrical connection should be left to a qualified installer.
Technical data
| Code | F25001236M |
| Brand | IVAR |
| Type | IVAR.SLW DC |
| Dimensions (W × H × D) | 815 × 335 × 128 mm |
| Weight | 14.0 kg |
| Heating output (water 45/40 °C) | 1.50 kW |
| Cooling output (water 7/12 °C) | 1.24 kW |
| Water volume of the heat exchanger | 0.50 l |
| Max. air flow | 228 m³/h |
| Max. operating pressure | 10 bar |
| Connection | 3/4" EK (right) |
| Power supply | 230 V, 50 Hz |
| Max. power consumption | 19 W |
| Control | without control |
| Installation | wall-mounted, vertical |
Frequently asked questions
Does this fan coil have a built-in control?
No, according to the official product name, this is the version without a control.
Where can the IVAR.SLW 400 be installed?
Vertically on a wall, usually high up. It is only 128 mm deep, draws air in from the top and the hydraulic connection is on the right.
What output does the IVAR.SLW 400 have?
With 45/40 °C water and 20 °C air it heats with 1.50 kW; with 7/12 °C water and 27 °C air it cools with 1.24 kW.
Additional parameters
| Category: | IVAR.SLW DC FILOMURO - Fan Coil Unit |
|---|---|
| Warranty: | 2 years |
| Weight: | 14 kg |
| Code: | F25001236M |
| Brand: | IVAR |
| Type: | IVAR.SLW DC |
| Dimensions (W × H × D): | 815 × 335 × 128 mm |
| Weight: | 14.0 kg |
| Heating output (water 45/40 °C): | 1.50 kW |
| Cooling output (water 7/12 °C): | 1.24 kW |
| Water volume of the heat exchanger: | 0.50 l |
| Max. air flow: | 228 m³/h |
| Max. operating pressure: | 10 bar |
| Connection: | 3/4" EK (right) |
| Power supply: | 230 V, 50 Hz |
| Max. power consumption: | 19 W |
| Control: | without control |
| Installation: | wall-mounted, vertical |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
