IVAR.T PPSU – PRESS tee from PPSU 63 × 63 × 63

Code: 88463300
Not rated Rating details
195,57 € –20 %
IVAR.T PPSU – T-kus PRESS z PPSU 63 × 63 × 63
195,57 € –20 % 156,46 € / pcs 127,20 € excl. VAT Measure price:
International delivery
To order (1-2 weeks)

Detailed information

Product detailed description

The IVAR.T PPSU is a press tee from the IVAR.PRESS system for connecting ALPEX, TURATEC or PEX pipe of the same diameter. For this code all three branches are 63 mm. The joints are pressed without an open flame and can be put under pressure immediately after pressing.

  • size 63 × 63 × 63 mm
  • PN 10, temperature range +3 to +95 °C
  • body made of PPSU plastic, AISI 304 pressing sleeve, EPDM O-ring
  • type F pressing jaws for 40, 50 and 63 mm, radial pressing
  • hygienic approval for drinking water

An unpressed joint shows up as a leak during the pressure test, so press according to the system manufacturer’s instructions. Installation should be left to a qualified installer.

Technical data

Code88463300
BrandIVAR
TypeIVAR.T PPSU
Size63 × 63 × 63 mm
Max. operating pressurePN 10
Temperature range+3 to +95 °C
MaterialPPSU body, AISI 304 sleeve, EPDM O-ring
Pressing jawstype F, radial pressing
Applicationdrinking water, heating

Frequently asked questions

What pipe diameter does the IVAR.T PPSU 63 × 63 × 63 tee connect?
Three sections of ALPEX, TURATEC or PEX pipe of the same 63 mm diameter.

Can it be used for drinking water?
Yes, it has a hygienic approval for drinking water and is also suitable for heating installations. The temperature range is +3 to +95 °C at PN 10.

Which jaws are used to press it?
For 63 mm, type F pressing jaws are used. Pressing is radial, according to the system manufacturer’s instructions.

Additional parameters

Category: T-pieces press - PPSU
Warranty: 2 years
Code: 88463300
Brand: IVAR
Type: IVAR.T PPSU
Size: 63 × 63 × 63 mm
Max. operating pressure: PN 10
Temperature range: +3 to +95 °C
Material: PPSU body, AISI 304 sleeve, EPDM O-ring
Pressing jaws: type F, radial pressing
Application: drinking water, heating

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.