Radiator heating configurator

The configurator is loading… If it does not appear after a moment, please refresh the page.

How to design radiators for the whole house

Draw your rooms or start from a flat or family house template, and the configurator selects a panel radiator with the right output for every room. It is based on the room's heat loss at −12 °C, the required temperature and the water temperature supplied by your boiler or heat pump. It places the radiator under the window, where it warms the cold air coming off the glass, and connects it to the manifold with PEX-AL-PEX 16×2 pipe.

What the configurator designs

  • Radiator type and size – 21, 22 or 33, height 300 to 900 mm and the shortest length that will heat the room. You can change the type, height and length, and the output is recalculated instantly.
  • Connection – bottom (VK) with an H-valve for pipes coming from the floor, or side (K) with a thermostatic valve and a lockshield valve.
  • Manifold and pipework – each radiator has its own outlet with a flow meter, plus pipe lengths, flow settings, a cabinet and the supply line from the boiler.
  • Combination with underfloor heating – in one house you can have underfloor heating on the ground floor and radiators upstairs, with a single bill of materials.
  • Thermostatic heads – each room keeps its own temperature without a room thermostat.

Radiators and accessories from stock

The bill of materials includes specific panel radiators, Vekoluxivar H-valves, thermostatic valve sets, heads, pipes, compression fittings, a manifold with cabinet and system protection – with current prices and availability. You add the whole set to the cart with one button, save the design as a link and send it to your installer or to us for review. The calculation is indicative and does not replace a heating design.

Vytvořil Shoptet | Design Shoptak.cz.