Large Ash Tray (500mm) for Boilers with Roof

Product detailed description

for boilers DC18S (manufactured 2010-2018), DC22S, DC25S, DC30SX, DC32S, DC40SX, DC50S, DC105S, DC150S, DCxxSP (manufactured before 2018)

Large ash tray ATMOS P0060 is used for removing ash:

- from Atmos boilers that have a heat-resistant ceramic shaped block - a "roof" - located in the lower chamber (see image above)

- from the lower chamber of Atmos boilers DC105S and DC150S with a spherical space

- from the middle chamber of three-chamber boilers DC18SP, DC25SP, DC30SPX, DC32SP manufactured before 2018, which had a ceramic roof in the middle chamber

Parameters:

• dimensions: length 500 mm, width 370 mm, height 145 mm 
• weight: 2.18 kg

Note: For boilers DC18S manufactured before 2010 or manufactured after 2018, which have a ceramic spherical space in the lower chamber (i.e. not a roof), or boiler DC18SP manufactured from 2018, which has a spherical space in the middle chamber, the correct part is ash tray P0043.

For boilers DC25SP, DC30SPX and DC32SP manufactured from 2018, which have a ceramic spherical space in the middle chamber (i.e. not a roof), the correct part is ash tray P0044.

Frequently Asked Questions

• How do I check that the „Large Ash Tray (500mm) for Boilers with Roof“ fits my exact equipment? The most reliable way is to compare the exact type/catalogue designation on your equipment’s (boiler, tank, water heater) rating plate with the compatibility listed directly in this product’s name (brand Atmos) and in its technical parameters above. If in doubt, send us the exact type designation of your equipment (including the serial number, if available) - we’ll gladly verify compatibility for you.
• Why is it important to use an original/compatible part rather than a universal replacement? Parts such as seals, sensors, or safety components (safety valves, thermal fuses) are usually sized precisely to the parameters of the specific device (pressure, temperature, sensor electrical resistance) - the wrong part can cause reduced function, leaks, or, in the case of safety components, a genuine safety risk.
• Does this part need to be installed by a professional? For simpler, mechanical parts (e.g. seals, covers, small accessories not connected to electricity, gas, or the pressurized section), a handy DIYer can usually manage the replacement after disconnecting the device from power and the relevant supply lines. For any work on the gas, electrical, or pressurized part of the device (e.g. sensors located directly in the combustion chamber, safety valves, electrical modules), however, we always recommend a service technician - especially since such work could otherwise affect the validity of the warranty on the whole device.
• How do I know this part is worn and needs replacing? Common signs include visible wear/cracking (for seals and rubber parts), a water or flue gas leak at the part, an error message on the controller display (for sensors and electronic modules), or a clearly reduced function of the device (e.g. irregular combustion for burner parts). If in doubt, the safest option is to have a service technician assess the condition during the regular annual inspection.
• Is it worth keeping this part at home as a spare? For parts that are subject to normal wear (seals, fuses, small mechanical components) and whose failure would mean a shutdown of heating or water heating, keeping a spare on hand is a sensible precaution - especially for older equipment, for which it may be harder to source the part quickly.