Linear Drain GREK 60 cm, Brushed Stainless Steel AISI 304

Product detailed description

The GREK drain in length 60 cm (600 mm) is a linear trough made of stainless steel AISI 304 with a brushed stainless steel patterned surface. The width of the trough is 62 mm, the installation depth is 52 mm, and the net weight of one piece is 2.4 kg.

Main features

• Brushed stainless steel surface with pattern, material AISI 304
• Bottom trough thickness 1.2 mm, cover thickness 1.5 mm
• 40 mm siphon cleaned from above, siphon flow 30 l/min
• Spacing dampers under the cover reduce the noise of falling water
• Surrounding flange 2 cm
• Adjustable feet for leveling the trough
• Reduction 50/40 mm, drain pipe diameter 40/50 mm

Technical data

Application and installation

During installation, pay attention to leveling the trough: the adjustable feet allow you to set its position so that it lies in a plane and the floor can have a slope towards it. An advantage is the siphon that is cleaned from above, so there is no need to reach into the waste pipe after each clogging. If the building has a pipe with a diameter of 50 mm prepared, the 50/40 mm reduction will be helpful. The spacing dampers reduce the sound of falling water, which you will appreciate especially during prolonged use.

Frequently asked questions

What is the flow rate of the GREK 60 cm drain siphon?

The siphon flow rate is 30 l/min.

What reduces the noise of falling water?

The cover is equipped with spacing dampers that reduce the noise of falling water.

What is the net weight of this model?

The drain with a length of 600 mm has a net weight of 2.4 kg.