Magnetic filter DIRTSTOP MINI 3/4" M x 3/4" F, 800 µm mesh, 12 000 Gauss – IVAR.DIRTSTOP MINI – SPECIAL OFFER
Code: 520550Product detailed description
IVAR.DIRTSTOP MINI (code 520550) is an ultra-compact magnetic filter from the DIRTSTOP range with dimensions of only 104 x 111 x 50 mm. It is mounted on the return pipe just before the heat source, where it protects the boiler, circulation pump, control components and heat meters from sludge and fragments circulating in the system.
Two functions in one pass
- separation – a neodymium magnet with an induction of 12 000 Gauss captures particles of ferrous origin
- filtration – a stainless steel mesh with a porosity of 800 µm retains other mechanical impurities
- an angled transparent chamber made of Grilamid shows how much dirt has already been captured
Finishes
- body made of nickel-plated brass CW617N, connection 3/4" external x 3/4" internal thread
- supplied with a ball valve on the system side, swivel neck on the heat source side, connecting union and check valve
- PN 3, operating temperature 0 to +90 °C, maximum glycol mixture 50 %
- Kv 5,0 m³/h (without check valve), approximate maximum flow 1,0 m³/h
Installation and maintenance
The filter is installed horizontally or vertically in the direction of the arrow on the body, away from direct sunlight; the check valve is inserted with the O-ring facing downwards. The manufacturer recommends the first cleaning one month after installation, then every two months during the heating season. The magnet is pulled out by the yellow cap without tools and the container with the mesh is simply washed with water and neutral soap. People with pacemakers should not approach the filter closer than 1 m.
Technical parameters
| Code | 520550 |
| Manufacturer | IVAR |
| Type | IVAR.DIRTSTOP MINI |
| Connection | 3/4" M x 3/4" F |
| Maximum operating pressure | PN 3 |
| Operating temperature | 0 to +90 °C |
| Magnetic induction | 12 000 Gauss |
| Mesh porosity | 800 µm (0,8 mm) |
| Flow coefficient Kv | 5,0 m³/h (without check valve) |
| Maximum flow (approximate) | 1,0 m³/h |
| Material | nickel-plated brass CW617N, Grilamid, AISI 304 |
| Maximum glycol content | 50 % |
| Dimensions | 104 x 111 x 50 mm |
| Supplied with | ball valve, union, check valve |
Frequently asked questions
Where should the magnetic filter DIRTSTOP MINI be installed?
On the return pipe of the heating system near the heat source, in the direction of the arrow on the body. It can be mounted horizontally or vertically.
How often should the filter be cleaned?
First after one month of installation, then approximately every two months during the heating season or according to the level of system contamination.
What is included in the delivery?
Filter with magnet and stainless steel mesh, ball valve on the system side, connecting union and check valve.
Can I use the filter in a system with antifreeze mixture?
Yes, the filter is also suitable for a mixture of water and glycol with a concentration of up to 50 %.
Additional parameters
| Category: | magnetic filters - rotary with cartridge |
|---|---|
| Warranty: | 2 years |
| Availability: | In stock or at supplier |
| Code: | 520550 |
| Manufacturer: | IVAR |
| Type: | IVAR.DIRTSTOP MINI |
| Connection: | 3/4" M x 3/4" F |
| Max. operating pressure: | PN 3 |
| Operating temperature: | 0 to +90 °C |
| Magnetic induction: | 12,000 Gauss |
| Mesh size: | 800 µm (0.8 mm) |
| Kv value: | 5.0 m³/h (without check valve) |
| Max. flow (indicative): | 1.0 m³/h |
| Material: | nickel-plated brass CW617N, Grilamid, AISI 304 |
| Max. glycol content: | 50% |
| Dimensions: | 104 x 111 x 50 mm |
| Supplied with: | ball valve, union fitting, check valve |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.