MARKO D 3kW MPP controller and inverter for heating water from photovoltaics with digital display
Code: OST_790011Product detailed description
Hot water from the sun without modifying your water heater
MARKO D 3kW is an MPP controller with an inverter that lets you heat water directly from photovoltaic panels in an ordinary electric water heater. It converts the direct current from the panels into alternating voltage with a frequency of approximately 50 Hz, so it can be connected to a standard heating element rated 1 to 3 kW without any modification to the water heater.
The controller continuously tracks the maximum power point (MPP) of the panels and sends everything the panels are currently producing to the heating element – in full sun as well as in weak light, when only a few tens or hundreds of watts are available. Compared with connecting the panels directly to the heating element, you get roughly 30 % more hot water.
The device is designed for family homes, cottages and businesses that want to use the sun to heat water simply and without solar thermal collectors – no pumps, piping or antifreeze, and no risk of the system overheating or freezing. The panels can even be located far from the water heater, for example elsewhere on the property; all you need is a solar cable running to them.
The controller needs no grid or other power source – it runs solely on energy from the panels. Version D has a colour digital display showing voltage, current and energy produced; via Bluetooth it can also be monitored in the e-test mobile app.
Why connecting panels directly to the water heater is not enough
When direct current from the panels is connected straight to the heating element, an electric arc forms every time the thermostat switches off, gradually burning the contacts and destroying the thermostat. In addition, heating output drops sharply as soon as the sun is not shining at full strength, because the panel voltage and current do not match the resistance of the heating element. MARKO solves both problems – the output is an alternating voltage that the thermostat can switch off safely, and MPP control keeps the panels at their optimum operating point.
Wiring and sizing
- One string of 6 to 8 PV panels is connected to the controller, for example 6 × 410 Wp or 8 × 300 Wp.
- The string voltage under load (Vmpp) should be up to 270 V and the open-circuit voltage (Voc) up to 330 V, ideally Vmpp around 200 – 250 V. Take the temperature coefficient of the panels into account when designing the system – voltage rises in frost.
- A single-phase resistive heating element of 1 to 3 kW is suitable, ideally 2 – 2.2 kW. The element rating is chosen according to the voltage and output of the panels.
- The MPP point is set with a trimmer on the board (factory setting approx. 190 V) and the controller shifts it automatically by about ±30 V depending on the load.
- By adding a control relay or a changeover switch, water can also be heated from the grid when there is not enough sun. A configuration with two water heaters is also possible.
The output voltage is not stabilised – it varies with the panel voltage in a range of approximately 150 – 330 V AC and has a modified sine waveform. Apart from the water heater, therefore, only connect appliances with a purely resistive load to the controller, such as radiant heaters, electric underfloor heating, towel warmers or classic incandescent bulbs. Do not connect devices containing electronics or “smart” water heaters – they could be damaged. The installation should be assessed and carried out by a qualified electrician.
Frequently asked questions
Do I have to replace the water heater or the heating element?
No, MARKO works with a standard electric water heater with a 1 – 3 kW resistive heating element. What matters is that the element rating matches the voltage and output of the panels.
Does the controller need power from the grid?
No, it runs solely on energy from the photovoltaic panels.
Can I heat water in winter or at night as well?
From the panels only while the sun is shining. For backup heating from the grid, a control relay or a PV/grid changeover switch is added to the system.
How many panels do I need?
One string of 6 to 8 panels depending on their output and voltage – for example 6 panels of 410 Wp or 8 panels of 300 Wp, with a string Vmpp of up to 270 V and Voc of up to 330 V.
Technical specifications
| Brand | MARKO |
| Type | MPP controller and inverter for water heating, version D with digital display |
| PV input voltage range | 24 – 330 V DC |
| Optimum Vmpp voltage | 200 – 250 V DC |
| Optimum Voc voltage | 220 – 350 V DC |
| Recommended panel string | 6 – 8 pcs, Vmpp up to 270 V, Voc up to 330 V |
| MPP point setting | trimmer on the board, factory setting approx. 190 V, automatic shift approx. ±30 V |
| Output power | 2.5 kW nominal, 3 kW maximum |
| Output voltage | depending on panel voltage, max. ±330 V AC |
| Output voltage waveform | modified sine wave, 3 levels (+, 0, −) |
| Output frequency | approx. 50 Hz |
| Efficiency | more than 96 % |
| Heat loss at full power | max. 27 W |
| Suitable load | single-phase resistive water heater element 1 – 3 kW (ideally 2 – 2.2 kW) |
| Power supply | from PV panels only |
| Display | digital, with Bluetooth |
| Ingress protection | IP40 |
| Dimensions | 24 × 16 × 8 cm |
| Warranty | 2 years |
Additional parameters
| Category: | Photovoltaics |
|---|---|
| Warranty: | 2 years |
| Brand: | MARKO |
| Manufacturer: | Ostrovní elektrárny s.r.o. |
| Manufacturer code: | 790011 |
| Type: | MPP controller and inverter for water heating, version D with digital display |
| PV input voltage range: | 24 – 330 V DC |
| Optimum Vmpp voltage: | 200 – 250 V DC |
| Optimum Voc voltage: | 220 – 350 V DC |
| Recommended panel string: | 6 – 8 pcs, Vmpp up to 270 V, Voc up to 330 V |
| Output power: | 2.5 kW nominal, max. 3 kW |
| Output voltage: | depending on panel voltage, max. ±330 V AC |
| Output voltage waveform: | modified sine wave, 3 levels |
| Efficiency: | more than 96 % |
| Heat loss at full power: | max. 27 W |
| Suitable load: | resistive water heater element 1 – 3 kW, single-phase |
| Power supply: | from PV panels only |
| Display: | digital, with Bluetooth |
| Ingress protection: | IP40 |
| Dimensions: | 24 × 16 × 8 cm |
| Warranty: | 2 years |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
