IVAR BRA.J9.100 WAFER J9 butterfly valve with pneumatic actuator AP 52S, single-acting – DN 25 – SALE
Code: J9.100.025S16Product detailed description
Application
The set opens and closes a pipeline automatically using compressed air. It pairs the wafer valve DN 25 with the pneumatic actuator AP 52S, which works in ON / OFF mode.
Features
- BRA.J9.100 valve: cast iron body, nickel-plated cast iron disc, EPDM seat, FKM O-ring
- maximum working pressure PN 16, temperature -10 to +120 °C
- pneumatic actuator AP 52S, single-acting – ON / OFF control with closing springs (emergency function)
- wafer installation between the pipe flanges
Installation and operation
Installation, compressed-air connection and commissioning should be carried out by a qualified contractor. Details of the set are in the datasheet; the datasheets of the valve and the actuator are kept separately.
Technical data
| Code | J9.100.025S16 |
| Manufacturer | IVAR |
| Type | BRA.J9.100 + AP |
| Nominal size | DN 25 |
| Actuator | AP 52S |
| Actuator function | single-acting |
| Max. pressure | PN 16 |
| Temperature range | -10 °C … +120 °C |
| Body material | cast iron |
| Disc | nickel-plated cast iron |
| Seal | EPDM; FKM O-ring |
| Control | ON / OFF |
Frequently asked questions
What is the difference between double-acting and single-acting actuators in the set?
The single-acting actuator (designation S) has closing springs with an emergency function, while the double-acting one (D) is for ON / OFF control. This set contains the AP 52S actuator (single-acting).
What is the valve made of and what conditions is it meant for?
The body is cast iron, the disc nickel-plated cast iron, the seat EPDM and the O-ring FKM. The maximum working pressure is PN 16 and the temperature -10 to +120 °C.
What does the set consist of?
According to the datasheet it is a set of the wafer valve BRA.J9.100 DN 25 and the pneumatic actuator AP 52S. The datasheets of the valve and the actuator are kept separately.
Additional parameters
| Category: | BRA.J9.100 WAFER J9 butterfly valves - nickel-plated cast iron disc |
|---|---|
| Warranty: | 2 years |
| Code: | J9.100.025S16 |
| Manufacturer: | IVAR |
| Type: | BRA.J9.100 + AP |
| Nominal size: | DN 25 |
| Actuator: | AP 52S |
| Actuator function: | single-acting |
| Max. pressure: | PN 16 |
| Temperature range: | -10 °C … +120 °C |
| Body material: | cast iron |
| Disc: | nickel-plated cast iron |
| Seal: | EPDM; FKM O-ring |
| Control: | ON / OFF |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
