IVAR BRA.J9.100 WAFER J9 butterfly valve with pneumatic actuator AP 83S, single-acting – DN 65 – SALE

Code: J9.100.065S16C
Action
Not rated Rating details
544,89 € –10 %
Medziprírubová klapka WAFER J9 IVAR BRA.J9.100 s pneumatickým pohonom AP 83S, jednočinný – DN 65 – AKCIA
544,89 € –10 % 490,40 € / pcs 398,70 € excl. VAT Measure price:
International delivery
To order (1-2 weeks)

Detailed information

Product detailed description

Application

The set opens and closes a pipeline automatically using compressed air. It pairs the wafer valve DN 65 with the pneumatic actuator AP 83S, which works in ON / OFF mode.

Features

  • BRA.J9.100 valve: cast iron body, nickel-plated cast iron disc, EPDM seat, FKM O-ring
  • maximum working pressure PN 16, temperature -10 to +120 °C
  • pneumatic actuator AP 83S, single-acting – ON / OFF control with closing springs (emergency function)
  • wafer installation between the pipe flanges

Installation and operation

Installation, compressed-air connection and commissioning should be carried out by a qualified contractor. Details of the set are in the datasheet; the datasheets of the valve and the actuator are kept separately.

Technical data

CodeJ9.100.065S16C
ManufacturerIVAR
TypeBRA.J9.100 + AP
Nominal sizeDN 65
ActuatorAP 83S
Actuator functionsingle-acting
Max. pressurePN 16
Temperature range-10 °C … +120 °C
Body materialcast iron
Discnickel-plated cast iron
SealEPDM; FKM O-ring
ControlON / OFF

Frequently asked questions

What is the difference between double-acting and single-acting actuators in the set?
The single-acting actuator (designation S) has closing springs with an emergency function, while the double-acting one (D) is for ON / OFF control. This set contains the AP 83S actuator (single-acting).

What is the valve made of and what conditions is it meant for?
The body is cast iron, the disc nickel-plated cast iron, the seat EPDM and the O-ring FKM. The maximum working pressure is PN 16 and the temperature -10 to +120 °C.

What does the set consist of?
According to the datasheet it is a set of the wafer valve BRA.J9.100 DN 65 and the pneumatic actuator AP 83S. The datasheets of the valve and the actuator are kept separately.

Additional parameters

Category: BRA.J9.100 WAFER J9 butterfly valves - nickel-plated cast iron disc
Warranty: 2 years
Code: J9.100.065S16C
Manufacturer: IVAR
Type: BRA.J9.100 + AP
Nominal size: DN 65
Actuator: AP 83S
Actuator function: single-acting
Max. pressure: PN 16
Temperature range: -10 °C … +120 °C
Body material: cast iron
Disc: nickel-plated cast iron
Seal: EPDM; FKM O-ring
Control: ON / OFF

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.