Wafer-type butterfly check valve BRA.D6.622 – DN 200, L = 89 mm

Code: D6622200
Not rated Rating details
2 760,12 € –20 %
Medziprírubová motýľová spätná klapka BRA.D6.622 – DN 200, L = 89 mm
2 760,12 € –20 % 2 208,10 € / pcs 1 795,20 € excl. VAT Measure price:
International delivery
To order (1-2 weeks)

Detailed information

Product detailed description

Use and function

The BRA.D6.622 valve in DN 200 is fitted between two flanges. The split disc opens under flow pressure and auxiliary springs return it to the closed position when the flow stops, so the medium cannot flow back. The stainless-steel version with FKM seal also suits chemical plants, the food industry, oils and hydrocarbons.

Valve data DN 200

  • body: stainless steel ASTM A351 CF8M; disc: stainless steel ASTM A351 CF8M; disc seal: FKM (Viton®)
  • PN 16 flanges to EN 1092-1, max. pressure for water 16 bar
  • medium temperature -20 to +150 °C
  • face-to-face length 89 mm, weight 14.97 kg
  • horizontal or vertical installation, minimum opening pressure and minimum back pressure for closing 0.1 bar

The valve is one-way – install it according to the flow arrow on the body, in a straight pipe section as far as possible from bends and circulation pumps; it is not suitable for steam. The lifting eye is used for handling.

Technical data

CodeD6622200
ManufacturerIVAR
TypeBRA.D6.622
Nominal sizeDN 200
Face-to-face length89 mm
Max. pressurePN 16
Medium temperature-20 to +150 °C
Body materialstainless steel ASTM A351 CF8M
Discstainless steel ASTM A351 CF8M
SealsFKM (Viton®)
Weight14.97 kg

Frequently asked questions

In what position is the valve installed?
In both horizontal and vertical positions. When installed horizontally, the hinge pin must always be vertical.

At what pressure does the valve open and close?
According to the manufacturer, the minimum opening pressure and the minimum back pressure needed for closing are both 0.1 bar.

How is the valve cleaned and maintained?
Remove the valve from the pipework, pull out the hinge pin (holding the springs firmly), clean the parts and check the condition of the seat and disc seal.

Additional parameters

Category: BRA.D6.622 - check valves - butterfly, stainless steel
Warranty: 2 years
Weight: 14.97 kg
Code: D6622200
Manufacturer: IVAR
Type: BRA.D6.622
Nominal size: DN 200
Face-to-face length: 89 mm
Max. pressure: PN 16
Medium temperature: -20 to +150 °C
Body material: stainless steel ASTM A351 CF8M
Disc: stainless steel ASTM A351 CF8M
Seals: FKM (Viton®)
Weight: 14.97 kg

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.