Wafer check valve BRA.06.430 without spring DN 400, L = 42 mm

Code: I06430400
Not rated Rating details
3 105,75 € –20 %
Medziprírubová spätná klapka BRA.06.430 bez pružiny DN 400, L = 42 mm
3 105,75 € –20 % 2 484,60 € / pcs 2 020 € excl. VAT Measure price:
International delivery
To order (1-2 weeks)

Detailed information

Product detailed description

Wafer check valve without spring

The BRA.06.430 DN 400 (code I06430400) is a series 06 check valve without a spring, fitted between two pipe flanges to stop the medium flowing back. The manufacturer lists it for heating, air conditioning (HVAC), water distribution and treatment, agricultural applications, compressed-air circuits, and oils and hydrocarbons. It can also be used for water containing up to 50 % glycol.

Technical features

  • nominal size DN 400, face-to-face length 42 mm, weight 36.1 kg
  • installation between flanges to EN 1092 (PN 6 / PN 10 / PN 16 according to the manufacturer)
  • for water at DN 300–400 the maximum pressure is 16 bar
  • temperature −20 °C to +100 °C continuous, briefly up to +110 °C; the maximum working pressure falls as the temperature rises
  • body and disc in ASTM A216 WCB carbon steel, NBR seal
  • the O-ring provides the seal, so no extra gasket is needed during installation
  • the rounded disc shape reduces pressure loss; Kv value 4,840 m³/h
  • minimum back pressure for closing 0.3 bar

Notes

The valve is not suitable for steam – do not use it in the liquid–vapour saturation region. The minimum opening pressure depends on the size and installation position; the values are given in the manufacturer's data sheet.

Technical data

CodeI06430400
ManufacturerIVAR
TypeBRA.06.430 (without spring)
Nominal sizeDN 400
Face-to-face length42 mm
FlangesPN 6 / PN 10 / PN 16, EN 1092-1
Max. pressure (water, DN 300–400)16 bar
Temperature-20 to +100 °C (briefly +110 °C)
Body and disc materialcarbon steel ASTM A216 WCB
SealNBR
Kv value4,840 m³/h
Weight36.1 kg
Min. back pressure for closing0.3 bar
Mediumwater with glycol up to 50 %

Frequently asked questions

In which position is the valve installed?
The series data sheet states that both vertical and horizontal installation are possible. The minimum opening pressure depends on the size and installation position; exact values are in the data sheet.

Is the valve suitable for water with glycol?
Yes, the manufacturer states use for water containing up to 50 % glycol. It is not suitable for steam, however.

How does it differ from the M6 series with spring?
The M6 PR series has a spring that, according to the manufacturer, allows installation in any position. This code belongs to series 06, so it is without a spring.

Additional parameters

Category: BRA.06.430, BRA.M6.430 PR - check valves - horizontal
Warranty: 2 years
Weight: 36.1 kg
Code: I06430400
Manufacturer: IVAR
Type: BRA.06.430 (without spring)
Nominal size: DN 400
Face-to-face length: 42 mm
Flanges: PN 6 / PN 10 / PN 16, EN 1092-1
Max. pressure (water, DN 300–400): 16 bar
Temperature: -20 to +100 °C (briefly +110 °C)
Body and disc material: carbon steel ASTM A216 WCB
Seal: NBR
Kv value: 4,840 m³/h
Weight: 36.1 kg
Min. back pressure for closing: 0.3 bar
Medium: water with glycol up to 50 %

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.