IVAR BRA.J9.622 WAFER J9 butterfly valve, stainless steel, FKM (Viton) – DN 125, L = 56 mm
Code: J9.622.125Product detailed description
Application
The valve is intended for chemical and industrial plants, drinking water, heating, air conditioning, district heating, water distribution and treatment, agriculture, compressed-air networks, and oils and hydrocarbons. It is suited to regulation but not to steam.
Features
- stainless steel body and disc (ASTM A351 gr. CF8-M), FKM (Viton) seat and O-ring, PTFE bush
- pressure between flanges PN 16, at the end of a line PN 10; temperature -10 to +150 °C (FKM)
- integrated ISO 5211 flange for manual, electric and pneumatic actuators; lockable lever
- centred holes for PN 6, PN 10, PN 16 and ANSI 150 flanges
- also available silicone-free on request
Installation and operation
The valve can be installed between flanges or at the end of a line. Bolts are not supplied and their length must be calculated from the flange thickness. The inner diameter of the pipe must allow the disc to open fully. Installation should be carried out by a qualified contractor.
Technical data
| Code | J9.622.125 |
| Manufacturer | IVAR |
| Type | BRA.J9.622 FKM |
| Nominal size | DN 125 |
| Face-to-face length | 56 mm |
| Max. pressure | PN 16 between flanges, PN 10 at line end |
| Temperature range | -10 °C … +150 °C |
| Flanges | ISO 5211; EN 1092 / ISO 7005 |
| Body material | stainless steel ASTM A351 CF8-M |
| Disc | stainless steel ASTM A351 CF8-M |
| Seal | FKM (Viton); O-ring FKM |
Frequently asked questions
Can the BRA.J9.622 valve be installed at the end of a line?
Yes, the datasheet allows it at a maximum pressure of PN 10. With hazardous gases, however, installation at the end of a line is not possible for DN 125 to 200.
Can an actuator be fitted to the valve?
Yes, the integrated ISO 5211 flange accepts manual, electric and pneumatic actuators.
Are bolts included?
No, according to the datasheet bolts are not supplied. Their length must be calculated from the flange thickness, and the inner diameter of the pipe must allow the disc to open fully.
Additional parameters
| Category: | BRA.J9.622 FKM - WAFER J9 butterfly valves - stainless steel |
|---|---|
| Warranty: | 2 years |
| Code: | J9.622.125 |
| Manufacturer: | IVAR |
| Type: | BRA.J9.622 FKM |
| Nominal size: | DN 125 |
| Face-to-face length: | 56 mm |
| Max. pressure: | PN 16 between flanges, PN 10 at line end |
| Temperature range: | -10 °C … +150 °C |
| Flanges: | ISO 5211; EN 1092 / ISO 7005 |
| Body material: | stainless steel ASTM A351 CF8-M |
| Disc: | stainless steel ASTM A351 CF8-M |
| Seal: | FKM (Viton); O-ring FKM |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
