Passive cooling module IVAR.TER-MP for CALIBRA E and ATLAS – Pt1000 sensor

Code: IHP203025
Not rated Rating details
2 303,79 € –20 %
Modul pasívneho chladenia IVAR.TER-MP pre CALIBRA E a ATLAS – snímač Pt1000
2 303,79 € –20 % 1 843,03 € / pcs 1 498,40 € excl. VAT Measure price:
International delivery
In stock at supplier

Detailed information

Product detailed description

The IVAR.TER-MP module (code IHP203025) enables a CALIBRA E or ATLAS ground source heat pump to supply cooling to the house as well. It uses the naturally cold brine circulating in the primary collector and works without running the compressor – so-called passive cooling (free cooling). The module only switches on when there is a cooling demand; otherwise the heat pump operates as usual.

Design

  • compact casing with plate heat exchanger, mixing valve, circulation pump and temperature sensor
  • Pt1000 sensor
  • brine connections Ø 28 mm Cu, cooling system flow and return Ø 22 mm Cu
  • weight 16.3 kg

When it is suitable

Passive cooling suits homes where cooling is needed only occasionally or only in some rooms, and with floor or ceiling cooling. The module is part of cooling kits type 3 (IHP086SCH003) and type 5, where it is supplemented by the EM3 expansion card. For LEGEND heat pumps the IHP205413 module is intended, and for CALIBRA RXT the IHP208348 module.

Technical data

CodeIHP203025
BrandIVAR
TypeIVAR.TER-MP
Cooling typepassive (free cooling)
Heat pumpsCALIBRA E, ATLAS
SensorPt1000
Built-in componentsplate heat exchanger, mixing valve, circulation pump, temperature sensor
Brine connectionsØ 28 mm Cu
Cooling system connectionsØ 22 mm Cu
Weight16.3 kg

Frequently asked questions

Does the compressor run during passive cooling?
No. The module uses the natural cold of the brine from the primary collector, and the heat pump compressor does not run.

What is built into the module?
A plate heat exchanger, a mixing valve, a circulation pump and a Pt1000 temperature sensor.

What is the module combined with?
In cooling kits type 3 and type 5 for CALIBRA E and ATLAS, the module is combined with the EM3 expansion card, which controls the cooling mixing group.

Additional parameters

Category: accessories for IVAR.HP LEGEND, ATLAS, CALIBRA heat pump series
Warranty: 2 years
Weight: 16.3 kg
Code: IHP203025
Brand: IVAR
Type: IVAR.TER-MP
Cooling type: passive (free cooling)
Heat pumps: CALIBRA E, ATLAS
Sensor: Pt1000
Built-in components: plate heat exchanger, mixing valve, circulation pump, temperature sensor
Brine connections: Ø 28 mm Cu
Cooling system connections: Ø 22 mm Cu
Weight: 16.3 kg

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.