IVAR.TER-MP passive cooling module for CALIBRA RXT (Pt1000; 230 V)
Code: IHP208348Product detailed description
Module IHP208348 makes it easier to build the hydraulics of passive cooling on Thermia ground-source heat pumps for homes. It is meant for CALIBRA RXT and comes with sensor Pt1000; 230 V.
- a built-in plate heat exchanger separates the borehole loop (ethanol diluted to −17 °C) from the cooling circuit that carries chilled water
- a mixing valve keeps the chilled water at the required temperature as it enters the cooling circuit
- the temperature sensor and all other parts are housed together in one neat box
The module only starts when cooling is requested; at other times the heat pump runs as usual. The cold comes from the naturally cool antifreeze in the primary loop while the compressor stays off (known as free cooling). It suits homes where cooling is needed only now and then, for example through floors or ceilings.
Technical data
| Code | IHP208348 |
| Manufacturer | IVAR |
| Type | IVAR.TER-MP |
| Intended for | CALIBRA RXT |
| Sensor | Pt1000; 230 V |
| Function | passive cooling (free cooling) |
| Heat exchanger | plate type, built in |
Frequently asked questions
When does the module switch on?
Only when the controller calls for cooling; otherwise the heat pump operates as normal.
Does the compressor run during passive cooling?
No, the cold comes from the naturally cool antifreeze fluid in the collector or borehole, so electricity use is low.
Additional parameters
| Category: | accessories for IVAR.HP LEGEND, ATLAS, CALIBRA heat pump series |
|---|---|
| Warranty: | 2 years |
| Code: | IHP208348 |
| Manufacturer: | IVAR |
| Type: | IVAR.TER-MP |
| Intended for: | CALIBRA RXT |
| Sensor: | Pt1000; 230 V |
| Function: | passive cooling (free cooling) |
| Heat exchanger: | plate type, built in |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
