Domestic hot water module IVAR.T-FAST iT 30 PRO – 30 l/min

Code: IVA49060780
Not rated Rating details
2 666,64 € –20 %
Modul pre prípravu teplej vody IVAR.T-FAST iT 30 PRO – 30 l/min
2 666,64 € –20 % 2 133,31 € / pcs 1 734,40 € excl. VAT Measure price:
International delivery
To order (1-2 weeks)

Detailed information

Product detailed description

The compact, fully pre-assembled IVAR.T-FAST iT 30 PRO module prepares hot water on the flow-through principle, only at the moment of draw-off. It takes its energy from a buffer tank, a solar system, a boiler or another heat source, so a hot water cylinder becomes unnecessary.

  • Maximum secondary-circuit flow 30 l/min, minimum activation flow 2.5 ± 0.3 l/min
  • Plate heat exchanger with 1.62 m² area, maximum primary-circuit flow 1800 l/h, pressure drop on the hot water side 0.65 bar
  • Hot water temperature is set between 40 ÷ 55 °C with a thermostatic head, and the Wilo PARA SC 15/1-6 primary circulator is switched by the flow sensor
  • Max. operating pressure 10 bar, max. temperature 90 °C, connections 3/4″ F / 1″ M, dimensions 610 × 410 × 260 mm, supply 230 V AC

During installation a check valve and an expansion vessel are required on the cold water inlet to the exchanger, plus the IVAR.DIRTSTOP magnetic filter to protect the module; where water hardness exceeds 25–30 °fH, water treatment is necessary. The IVAR.KIT iT 30 PRO circulation kit is not included. Mounting and the electrical connection are a job for a qualified installer.

Technical data

CodeIVA49060780
ManufacturerIVAR
TypeIVAR.T-FAST iT 30 PRO
Max. secondary flow30 l/min
Min. flow2.5 ± 0.3 l/min
Exchanger area1.62 m²
Max. operating pressure10 bar
Max. temperature90 °C
Connections3/4″ / 1″ (F / M)
Dimensions610 × 410 × 260 mm
Supply230 V AC; 45 W

Frequently asked questions

Is the circulation kit included with the IVAR.T-FAST iT 30 PRO module?
No. The IVAR.KIT iT 30 PRO kit is an optional accessory and is ordered separately.

What has to be provided on the cold water side?
A check valve and an expansion vessel on the cold water inlet to the exchanger, plus the IVAR.DIRTSTOP magnetic filter to protect the module. Above 25–30 °fH hardness the water must be treated.

Do I need a hot water cylinder with this module?
No. Water is heated instantaneously in the plate heat exchanger at draw-off; the energy comes from the heat source, for example a buffer tank.

Additional parameters

Category: IVAR.SAT apartment stations
Warranty: 2 years
Code: IVA49060780
Manufacturer: IVAR
Type: IVAR.T-FAST iT 30 PRO
Max. secondary flow: 30 l/min
Min. flow: 2.5 ± 0.3 l/min
Exchanger area: 1.62 m²
Max. operating pressure: 10 bar
Max. temperature: 90 °C
Connections: 3/4″ / 1″ (F / M)
Dimensions: 610 × 410 × 260 mm
Supply: 230 V AC; 45 W

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.