SolarAssistant monitoring unit on Raspberry Pi 4B for Axpert, Infini, Deye and Solis inverters, 230 V AC power
Code: OST_900268Product detailed description
Your solar system at a glance in the browser and on your phone
SolarAssistant is software for monitoring and controlling a solar system, and it also allows full configuration of inverters over the internet. It runs on a Raspberry Pi connected to the solar inverter and optionally to the battery BMS (Pylontech or compatible). The unit is designed to run permanently.
You can access it from a web browser or from the Android and iPhone app – on the local network or over the internet. The software was developed in South Africa and its cloud does not store data.
It is intended for Voltronic Axpert and Infinisolar inverters, including their clones sold under other brands. It can also monitor and remotely manage Deye and Solis inverters. It handles up to 29 separate inverters of the same type sharing a communication protocol; the system treats them as one installation site and adds up their values.
Connecting to the inverter
Check which communication connector your inverter has:
- micro USB – most often new King, MAX and VM III / VM IV inverters,
- USB type B (square, as on printers) – some KS, MKS, VM, VM II and Infinisolar inverters; the cable usually comes with the inverter,
- RS232 in an RJ45 socket – very old KS and MKS inverters and most new ones; use the RJ45/RS232 cable supplied with the inverter plus an RS232-to-USB adapter (which is also used to connect Deye inverters).
With several inverters you can set up multiple communication lines at once. However, the Raspberry Pi can power no more than 2–3 USB cables or RS232 converters; for more, a powered USB hub is needed.
Package contents
- Raspberry Pi 4 board (2 GB RAM),
- case with heatsink,
- microSD card with software and licence,
- power adapter 230 V AC to 5 V / 3 A DC.
Service cables exist for detailed monitoring of Pylontech batteries: a 6-pin RJ11 for older US2000, US3000, US2000B and US3000B and an 8-pin RJ45 for the USxxxxC series. The Raspberry Pi 4 also supports HDMI output to a TV or monitor.
Frequently asked questions
The unit has stopped sending data. What now?
The most common cause is a corrupted file system on the microSD card after a sudden power cut. Remove the card, write the image from your SolarAssistant account to it again (e.g. with Balena Etcher, or EtchDroid on a phone) and put it back – settings and licence are usually retained.
How can card damage be prevented?
Switch the unit off with the Shutdown button in the System – Configure menu. If the monitoring loses power whenever the inverter shuts down, consider powering it from the batteries via a DC/DC converter instead of the AC output.
Can several inverters be monitored?
Yes, up to 29 inverters of the same type sharing a protocol.
Technical specifications
| Brand | justPi |
| Manufacturer | justPi |
| Type | monitoring unit with SolarAssistant software |
| Hardware | Raspberry Pi 4, 2 GB RAM |
| Supported inverters | Axpert, Infinisolar + clones, Deye, Solis |
| Batteries | Pylontech or compatible BMS (optional) |
| Number of inverters | up to 29 of the same type |
| Access | web browser, Android/iPhone app, local or via internet |
| Inverter interfaces | micro USB, USB type B, RS232 (RJ45) via adapter |
| Power supply | adapter 230 V AC → 5 V / 3 A DC |
| Package contents | Raspberry Pi 4, case with heatsink, licensed microSD, adapter |
| Weight | 0.475 kg |
Additional parameters
| Category: | Photovoltaics |
|---|---|
| Warranty: | 2 years |
| Weight: | 0.475 kg |
| Brand: | justPi |
| Manufacturer: | justPi |
| Type: | monitoring unit with SolarAssistant software |
| Hardware: | Raspberry Pi 4, 2 GB RAM |
| Supported inverters: | Axpert, Infinisolar + clones, Deye, Solis |
| Batteries: | Pylontech or compatible BMS (optional) |
| Number of inverters: | up to 29 of the same type |
| Access: | web browser, Android/iPhone app, local or via internet |
| Inverter interfaces: | micro USB, USB type B, RS232 (RJ45) via adapter |
| Power supply: | adapter 230 V AC → 5 V / 3 A DC |
| Package contents: | Raspberry Pi 4, case with heatsink, licensed microSD, adapter |
| Weight: | 0.475 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
