IVAR.CIM 138 antifreeze valve 2" × 6/4" for heat pumps, 10 bar, 0 to +90 °C

Code: CIM138050
Not rated Rating details
137,76 € –20 %
Nezámrzný ventil IVAR.CIM 138 2" × 6/4" pre tepelné čerpadlá, 10 bar, 0 až +90 °C
137,76 € –20 % 110,21 € / pcs 89,60 € excl. VAT Measure price:
International delivery
To order (1-2 weeks)

Detailed information

Product detailed description

IVAR.CIM 138 in size 2" × 6/4" (code CIM138050) is an antifreeze valve for the condenser circuit of a heat pump. When the heating water temperature drops close to freezing, the valve opens and discharges a small amount of water so that the water in the system does not freeze and damage the condenser.

Data from the data sheet

  • opening temperature 3 °C, closing temperature 4 °C, accuracy ±1 °C
  • max. static pressure 10 bar, operating temperatures 0 to +90 °C, ambient temperature −30 to +60 °C
  • Kv 150, Ø 40 mm, weight 605 g, ISO 228 thread
  • body of brass CW617N, EPDM O-rings

Installation

The valve is installed only vertically with the outlet pointing down, outdoors at the location with the lowest temperatures and at a sufficient distance from heat sources. Leave installation to a professional.

Technical data

CodeCIM138050
ManufacturerIVAR
TypeIVAR.CIM 138
Dimension2" × 6/4"
Max. operating pressure10 bar
Temperature range0 to +90 °C
Opening / closing temperature3 °C / 4 °C
Kv value150
MaterialBrass CW617N, EPDM O-rings

Frequently asked questions

What is the IVAR.CIM 138 antifreeze valve for?
When the heating water temperature in the condenser circuit drops close to freezing, it discharges a small amount of water and protects the heat pump from frost damage.

At what temperature does the valve open and close?
It opens at 3 °C and closes at 4 °C with an accuracy of ±1 °C.

How is the valve installed?
Only vertically, with the outlet pointing down, outdoors at the coldest location and away from heat sources.

Additional parameters

Category: accessories for IVAR.HP ATEC, ITEC heat pump series
Warranty: 2 years
Code: CIM138050
Manufacturer: IVAR
Type: IVAR.CIM 138
Dimension: 2" × 6/4"
Max. operating pressure: 10 bar
Temperature range: 0 to +90 °C
Opening / closing temperature: 3 °C / 4 °C
Kv value: 150
Material: Brass CW617N, EPDM O-rings

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.