Unmixed boiler module VARIMIX IVAR.VAR 10, DN 25, with DAB.EVOSTA2 40-70/180 pump (550633D)

Code: 550633D
Not rated Rating details
563,34 € –20 %
Nezmiešaný kotlový modul VARIMIX IVAR.VAR 10, DN 25, s čerpadlom DAB.EVOSTA2 40-70/180 (550633D)
563,34 € –20 % 450,67 € / pcs 366,40 € excl. VAT Measure price:
International delivery
To order (1-2 weeks)

Detailed information

Product detailed description

The unmixed boiler module IVAR.VAR 10 (code 550633D) feeds a single circuit with heating water, without mixing. It is fully reversible and fitted with a check valve.

  • Included: flow and return pipes, ball valves with built-in thermometers, a ball valve ahead of the pump and EPP insulation
  • Data: PN 6, up to +120 °C, flow up to 3000 l/h, Kv 7.62
  • Connection: module 1″ FF, pump 6/4″ with 130 mm centre distance; the module joins the manifold with a soft seal
  • Pump: The DAB.EVOSTA2 40-70/180 circulator is included.

Any VARIMIX component can be fitted with a special contact insulation shell, which prevents condensation in cooling operation.

Technical data

Code550633D
ManufacturerIVAR
TypeIVAR.VAR 10
Product typeunmixed boiler module
Nominal sizeDN 25
Max. operating pressurePN 6
Max. operating temperature+120 °C
Max. flow3000 l/h
Flow coefficient Kv7.62
Module connection1″ FF (female × female)
Pump connection6/4″ FF, centre distance 130 mm
CirculatorDAB.EVOSTA2 40-70/180
Materialbrass, carbon steel, EPP

Frequently asked questions

Can the pump be replaced without draining the system?
Yes, the ball valve ahead of the pump allows the pump to be replaced or serviced without draining the heating system.

Is a circulation pump included?
Yes, the module is supplied with the DAB.EVOSTA2 40-70/180 pump. The version without a pump has a code without the final D.

Additional parameters

Category: accessories
Warranty: 2 years
Code: 550633D
Manufacturer: IVAR
Type: IVAR.VAR 10
Product type: unmixed boiler module
Nominal size: DN 25
Max. operating pressure: PN 6
Max. operating temperature: +120 °C
Max. flow: 3000 l/h
Flow coefficient Kv: 7.62
Module connection: 1″ FF (female × female)
Pump connection: 6/4″ FF, centre distance 130 mm
Circulator: DAB.EVOSTA2 40-70/180
Material: brass, carbon steel, EPP

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.