Nozzle DC0200

Product detailed description

Ceramic nozzle DC0200 for the ATMOS DC105S boiler

Code DC0200 designates an original ceramic nozzle from the gasification nozzle range. It is intended exclusively for the ATMOS DC105S boiler, so before ordering please check that it matches your boiler type.

The sealing cement and sealing cords supplied in the package are used to seal the nozzle at the sides and at the front of the boiler, so you receive the necessary sealing material together with the part.

Frequently asked questions

• How do I choose the right output for a solid fuel boiler? Start from the calculated heat loss of the heated building. With wood/coal boilers, however, also bear in mind that during a single load the boiler burns for several hours at essentially constant output - which is why it is common practice to add an accumulation tank to the boiler, which stores the excess heat for later use instead of the boiler having to be throttled down inefficiently.
• What else do I need to install this boiler? Besides the boiler itself, the system usually requires: an accumulation (buffer) tank of suitable volume, a circulation pump (often already with a built-in Laddomat or a thermostatic valve protecting the boiler against low-temperature corrosion), a safety valve, an expansion vessel and a flue/chimney with sufficient draught matching the boiler output - you will find the exact chimney draught values in the technical parameters above.
• What fuel is suitable and what is not? Use only the fuel recommended by the manufacturer for the given model (usually log wood of a defined length and moisture content, or brown coal briquettes or coal depending on the boiler type) - unsuitable or excessively wet fuel reduces efficiency, increases the formation of tar and deposits and may cause damage to the boiler.
• What about the chimney inspection and legislation? Before the boiler is put into operation, and also regularly during its use (usually once a year for solid fuels), an inspection/cleaning of the chimney by an authorised chimney sweep is required by law - without the relevant inspection certificate, an insurance claim in the event of a fire may also be disputed.
• How much maintenance does the boiler require? It usually includes regular ash removal and cleaning soot from the heat exchange surfaces/flue gas passages (the interval depends on intensity of use, usually in the order of weeks), and a thorough annual inspection including the seals and the chimney.
• Can I install the boiler myself? The placement and connection of the boiler to the heating system, the chimney and the safety components should be carried out, or at least professionally checked, by a heating technician - this is an appliance with an open fire, high temperatures and pressurised components, where a mistake in the connection can pose a safety risk.