45° Bend IVAR.IVN422 – press x press, stainless steel AISI 304, 108 mm

Code: IVN422.108
Not rated Rating details
200,49 € –20 %
Oblúk 45° IVAR.IVN422 – press x press, nerezová oceľ AISI 304, 108 mm
200,49 € –20 % 160,39 € / pcs 130,40 € excl. VAT Measure price:
International delivery
In stock at supplier

Detailed information

Product detailed description

The IVAR.IVN422 – 108 mm bend from the IVAR system in AISI 304 stainless steel (1.4301) has a press socket with an EPDM O-ring at both ends. It joins two 108 mm pipes at 45° without changing size. It handles pressures up to PN 16 and temperatures from -20 °C to +120 °C.

Applications

Closed heating and cooling circuits, solar systems, compressed air and vacuum lines, inert and technical gases, technical and process liquids, industrial applications, waste water and rainwater. Not for drinking water – a symbol on the fitting also indicates this.

Installation

Cut the pipe square with a pipe cutter or fine-toothed saw (no angle grinder or flame), deburr it inside and out and push it in up to the stop; mark the insertion depth with a marker. Size 108 mm is pressed with M-profile press chains (at least 3 segments, usually with an adapter); the manufacturer does not accept one-piece jaws. The instructions recommend securing the pipes and fitting with clamping vices before pressing so that they are perfectly aligned. Each joint is pressed only once – pressing again may damage the seal.

The coloured indicator and the LBP O-ring are supplied only for sizes 15 to 54 mm. For size 108 mm, pressing is complete when the end faces of the chain segments touch.

Flush the entire circuit before commissioning and follow the system manufacturer's installation instructions. If you need a spigot end on one side, choose type IVAR.IVN423 in the same size.

Technical data

CodeIVN422.108
ManufacturerIVAR
TypeIVAR.IVN422
Design45° bend, press socket x press socket
Pipe diameter (d)108 mm
Materialstainless steel AISI 304 (1.4301)
SealEPDM O-ring
Press indicatorno (15–54 mm only)
Max. operating pressurePN 16
Max. vacuum-0.8 bar (absolute pressure 0.2 bar)
Operating temperature-20 °C to +120 °C
Press jawsM profile, press chain, min. 3 segments
Antifreezemax. 50%
Dimensions as per drawingL 139 mm, Z 62 mm
Drinking waternot suitable

Frequently asked questions

Can the IVAR.IVN422 fitting be used for drinking water?
No. The manufacturer does not intend the AISI 304 stainless system for drinking water, which is also indicated by a symbol on the fitting body. It is designed for heating, cooling, solar systems and lines for technical media.

Which press jaws do I need for the 108 mm size?
M-profile press chains with at least three segments, usually with an adapter. The manufacturer does not accept one-piece jaws for diameters from 42 to 108 mm.

Does the fitting in size 108 mm have a press indicator?
No, the coloured strip and the LBP O-ring are supplied only for sizes 15 to 54 mm. Pressing is complete when the end faces of the chain segments touch each other.

Can antifreeze be used in a circuit with this bend?
Yes, the manufacturer allows antifreeze at a concentration of no more than 50%. The operating temperature may range from -20 °C to +120 °C.

Additional parameters

Category: IVAR.IVN22 - elbows 45° FF PRESS
Warranty: 2 years
Code: IVN422.108
Manufacturer: IVAR
Type: IVAR.IVN422
Design: 45° bend, press socket x press socket
Pipe diameter (d): 108 mm
Material: stainless steel AISI 304 (1.4301)
Seal: EPDM O-ring
Press indicator: no (15–54 mm only)
Max. operating pressure: PN 16
Max. vacuum: -0.8 bar (absolute pressure 0.2 bar)
Operating temperature: -20 °C to +120 °C
Press jaws: M profile, press chain, min. 3 segments
Antifreeze: max. 50%
Dimensions as per drawing: L 139 mm, Z 62 mm
Drinking water: not suitable

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.