90° Press Elbow with One Spigot End IVAR.IVN421 – AISI 304 stainless steel, 108 mm
Code: IVN421.108Product detailed description
The IVAR.IVN421 elbow in size 108 mm changes the direction of a stainless steel pipeline by 90°. One side has a press socket for the pipe, the other a spigot end of the same diameter that is inserted into the press socket of another fitting – so the elbow can be installed directly behind a fitting without a pipe spacer. The diameter stays the same, the material is AISI 304 (1.4301) stainless steel and the socket is sealed by an EPDM O-ring.
Applications
- closed heating and cooling circuits
- solar systems
- compressed air and vacuum systems
- inert and technical gases
- technical and process liquids, industrial applications
- waste water and rainwater
It is not intended for drinking water installations.
Pressing the 108 mm size
For 108 mm diameter, M-profile press chains (at least 3 segments) with a suitable adapter are used. This size has neither a press indicator nor an LBP O-ring (the manufacturer offers them only for sizes 15 to 54 mm), so check every joint carefully after pressing. Before pressing, it is advisable to fix the pipes and fitting with assembly vices so that they are perfectly aligned.
Cut the pipe square to its axis, deburr it inside and outside and mark the insertion depth with a marker. Follow the system manufacturer's installation instructions during assembly and flush the entire system before commissioning.
Operating data
Pressure up to PN 16, vacuum down to -0.8 bar (absolute pressure 0.2 bar), temperature -20 °C to +120 °C, antifreeze at a concentration of no more than 50%. Dimensions according to the technical drawing: L 215 mm, H 234 mm, Z 138 mm.
If you need an elbow with a press socket on both sides, choose type IVAR.IVN420 in the same size.
Technical data
| Code | IVN421.108 |
| Manufacturer | IVAR |
| Type | IVAR.IVN421 |
| Fitting type | 90° elbow, press socket x spigot end, not reduced |
| Pipe diameter (d) | 108 mm |
| Material | AISI 304 (1.4301) stainless steel |
| Seal | EPDM O-ring |
| Press indicator | no (only for 15 – 54 mm) |
| Max. operating pressure | PN 16 |
| Max. vacuum | -0.8 bar (absolute pressure 0.2 bar) |
| Operating temperature | -20 °C to +120 °C |
| Press jaw profile | M |
| Antifreeze concentration | max. 50% |
| Dimensions per drawing | L 215 mm, H 234 mm, Z 138 mm |
| Drinking water | not suitable |
Frequently asked questions
What is the spigot end of the IVAR.IVN421 elbow for?
The spigot end has the same diameter as the pipe, 108 mm, so it is inserted directly into the press socket of another fitting of the same size and pressed together with it. No pipe spacer is needed.
Can the IVAR.IVN421 elbow be used for drinking water?
No. According to the manufacturer, AISI 304 stainless steel fittings are not suitable for drinking water. They are intended for closed heating and cooling circuits, solar systems and lines for compressed air, technical gases and liquids.
Which press jaws do I need for the 108 mm size?
M profile; from 42 mm diameter upwards, press chains with at least three segments and a suitable adapter.
Does the 108 mm size have a press indicator or LBP O-ring?
No, the manufacturer supplies them only for sizes 15 to 54 mm. For large diameters, it recommends fixing the pipes and fitting with assembly vices before pressing.
Additional parameters
| Category: | IVAR.IVN21 - elbows 90° MF PRESS |
|---|---|
| Warranty: | 2 years |
| Code: | IVN421.108 |
| Manufacturer: | IVAR |
| Type: | IVAR.IVN421 |
| Fitting type: | 90° elbow, press socket x spigot end, not reduced |
| Pipe diameter (d): | 108 mm |
| Material: | AISI 304 (1.4301) stainless steel |
| Seal: | EPDM O-ring |
| Press indicator: | no (only for 15 – 54 mm) |
| Max. operating pressure: | PN 16 |
| Max. vacuum: | -0.8 bar (absolute pressure 0.2 bar) |
| Operating temperature: | -20 °C to +120 °C |
| Press jaw profile: | M |
| Antifreeze concentration: | max. 50% |
| Dimensions per drawing: | L 215 mm, H 234 mm, Z 138 mm |
| Drinking water: | not suitable |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
