IVAR.DP 55 edge insulation strip with foil – 5 mm thick, 100 mm wide, 50 m roll

Code: DP55
Not rated Rating details
0,80 € –20 %
Obvodový dilatačný pás IVAR.DP 55 s fóliou – hrúbka 5 mm, šírka 100 mm, rolka 50 m
0,80 € –20 % 0,64 € / m 0,52 € excl. VAT Measure price:
International delivery
In stock at supplier

Detailed information

Product detailed description

Underfloor heating needs room around the heated slab for thermal expansion. The IVAR.DP 55 edge strip creates this gap along all vertical structures of the building. It is designed for dry systems of wet underfloor heating, where it separates the gypsum fibreboards (for example of the IVAR.RENOVA system) from the walls.

  • material: foamed polyethylene
  • thickness 5 mm, width 100 mm
  • fused foil 120 mm long
  • longitudinal perforation for easy removal of the protruding part
  • packaging: 50 m roll

Installation

The strip is fitted before the system insulation boards are laid. Once they are in place, the foil is pulled over the boards to form a tray that prevents screed from running under the insulation; it can be held down by the pipe when laying the loops. After the floor is finished, the protruding strip is trimmed flush with the slab edge by tearing it along the perforation or cutting it off.

For concrete and anhydrite heated slabs, the IVAR.DP 50 strip, 8 mm thick and 150 mm wide, is intended.

Technical data

CodeDP55
ManufacturerIVAR
TypeIVAR.DP 55
Product typeedge insulation strip with foil
Thickness5 mm
Width100 mm
Materialfoamed polyethylene
Foilfused, 120 mm long
Packaging50 m roll
Usedry underfloor heating systems (gypsum fibreboards)

Frequently asked questions

What is the difference between IVAR.DP 55 and IVAR.DP 50?
IVAR.DP 55 (5 × 100 mm) separates the gypsum fibreboards of dry underfloor heating systems from vertical structures. IVAR.DP 50 (8 × 150 mm) is intended for concrete and anhydrite heated slabs.

When is the edge strip fitted?
Before the system insulation boards are laid. Once they are in place, the strip's foil is pulled over the boards to form a tray.

How is the protruding part of the strip removed?
After the floor is finished, the strip is trimmed flush with the slab edge. It is torn off along the longitudinal perforation or cut off.

Additional parameters

Category: accessories for system boards
Warranty: 2 years
Code: DP55
Manufacturer: IVAR
Type: IVAR.DP 55
Product type: edge insulation strip with foil
Thickness: 5 mm
Width: 100 mm
Material: foamed polyethylene
Foil: fused, 120 mm long
Packaging: 50 m roll
Use: dry underfloor heating systems (gypsum fibreboards)

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.