IVAR.EUROTANK VS1 1000 water heater for DHW – with option to install heating inserts, 955 l
Code: 1K09A05Product detailed description
Hot water storage tank with a flange for an insert
The IVAR.EUROTANK VS1 1000 is a floor-standing, indirectly heated tank with a total volume of 955 l for producing and storing hot water for human consumption. It has no permanently built-in coil – heat is supplied through one integrated Ø 290 / 220 mm flange that takes an IVAR.SR tinned copper heating insert, or directly by the heat source. The tank suits closed heating systems with a boiler, heat pump, stove insert or solar system. Electric heating elements are intended for emergency heating only, not as the sole permanent heat source.
Design
- steel vessel with SMALGLASS internal coating (DIN 4753-3, UNI 10025)
- max. operating pressure 10 bar, max. operating temperature 95 °C
- 5/4" magnesium protective anode and 1/2" port for an electronic anode
- removable soft VLIES polyester fibre insulation, 100 mm thick, reaction to fire class B-s2,d0
- energy class C
- connections: cold water inlet and hot water outlet 6/4", drain 1", recirculation/electric heater 6/4", sensor and probe 1/2"
Installation
The tank is placed in a closed, ventilated room with a temperature of at least +5 °C on a level floor with sufficient load-bearing capacity; allow for a tilt height of 2200 mm when handling it. A safety valve, pressure-reducing valve and expansion vessel (50–100 l recommended by the manufacturer) belong on the cold water supply – without the reducing valve and expansion vessel the manufacturer will not accept warranty claims. The hardness of the supply water must not exceed 2 mmol/l (11.2 °dH). Installation may only be carried out by a qualified company that completes the commissioning report. Once a year the tank must be desludged and the anode checked.
The same range also includes types without a flange (EUROTANK VS) and with three flanges (EUROTANK VS3).
Technical data
| Code | 1K09A05 |
| Manufacturer | IVAR |
| Type | IVAR.EUROTANK VS1 1000 |
| Total volume | 955 l |
| Internal coating | SMALGLASS |
| Flange for heating insert | 1 × Ø 290 / 220 mm |
| Thermal insulation | VLIES 100 mm, removable |
| Energy class | C |
| Max. operating pressure | 10 bar |
| Max. operating temperature | 95 °C |
| Height incl. insulation | 2205 mm |
| Diameter incl. insulation | 990 mm |
| Tilt height | 2200 mm |
| Empty weight | 207 kg |
| Water inlet / outlet | 6/4" / 6/4" |
Additional parameters
| Category: | buffer tanks and hot water heaters |
|---|---|
| Warranty: | 2 years |
| Weight: | 207 kg |
| Code: | 1K09A05 |
| Manufacturer: | IVAR |
| Type: | IVAR.EUROTANK VS1 1000 |
| Total volume: | 955 l |
| Internal coating: | SMALGLASS |
| Flange for heating insert: | 1 × Ø 290 / 220 mm |
| Thermal insulation: | VLIES 100 mm, removable |
| Energy class: | C |
| Max. operating pressure: | 10 bar |
| Max. operating temperature: | 95 °C |
| Height incl. insulation: | 2205 mm |
| Diameter incl. insulation: | 990 mm |
| Tilt height: | 2200 mm |
| Empty weight: | 207 kg |
| Water inlet / outlet: | 6/4" / 6/4" |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.