PE-RT IVAR Pipe 16 × 2 mm for Floor Heating – EVOH Oxygen Barrier, Spool 500 m
Code: 70016500PProduct detailed description
The pipe IVAR.PE-RT 16 × 2 is a flexible plastic pipe for hot water underfloor heating systems. It is manufactured from polyethylene with increased thermal resistance (PE-RT) in a five-layer construction with an oxygen diffusion barrier EVOH and meets the EN ISO 22391 standard. It is supplied on a reel with a length of 500 m, red in color.
Features
- outer diameter 16 mm, wall thickness 2 mm, inner diameter 12 mm
- water volume 0.113 l per meter
- pressure class PN 6 at 90 °C and PN 10 at 60 °C
- oxygen permeability at 40 °C maximum 0.32 g/m³ per day
- roughness coefficient 0.007 mm, thermal conductivity 0.4 W/m·K
The pipe is flexible, withstands pressure well at high temperatures, does not corrode, is not affected by limescale and has high chemical resistance. IVAR also recommends it for dry underfloor heating systems with system panels IVAR.ST 20 AL and IVAR.ST 30 AL. Pipes are connected using crimping tools IVAR.TP or RP, or compression fittings IVAR.PT.
The size 17 × 2 mm is supplied on a reel of 600 m under the code 70017600P.
Technical parameters
| Code | 70016500P |
| Manufacturer | IVAR |
| Type | IVAR.PE-RT |
| Dimensions | 16 × 2 mm |
| Inner diameter | 12 mm |
| Water volume | 0.113 l/m |
| Material | PE-RT, five-layer with oxygen barrier EVOH |
| Pressure class | PN 6 at 90 °C / PN 10 at 60 °C |
| Oxygen permeability (40 °C) | max. 0.32 g/m³ per day |
| Thermal conductivity | 0.4 W/m·K |
| Standard | EN ISO 22391 |
| Color | red |
| Packaging | reel 500 m |
Frequently asked questions
What pressure and temperature can the pipe withstand?
The pipe has a pressure class of PN 6 at 90 °C and PN 10 at 60 °C. The operating temperature range according to EN ISO 22391 is 20 to 90 °C.
What fittings are used to connect the pipe?
Crimping tools IVAR.TP or RP, or compression fittings IVAR.PT.
Does the pipe have an oxygen barrier?
Yes, it is a five-layer PE-RT pipe with a diffusion oxygen barrier EVOH. The oxygen permeability at 40 °C is maximum 0.32 g/m³ per day.
How much water is in the pipe?
The 16 × 2 mm pipe has an inner diameter of 12 mm and holds 0.113 l of water per meter.
Additional parameters
| Category: | PEX, PE-RT pipe |
|---|---|
| Warranty: | 2 years |
| Availability: | In stock or at supplier |
| Code: | 70016500P |
| Manufacturer: | IVAR |
| Type: | IVAR.PE-RT |
| Size: | 16 × 2 mm |
| Inside diameter: | 12 mm |
| Water content: | 0.113 l/m |
| Material: | PE-RT, five-layer with EVOH oxygen barrier |
| Pressure class: | PN 6 at 90 °C / PN 10 at 60 °C |
| Oxygen permeability (40 °C): | max. 0.32 g/m³ per day |
| Thermal conductivity: | 0.4 W/m·K |
| Standard: | EN ISO 22391 |
| Colour: | red |
| Packaging: | 500 m coil |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.