Pipe fixing strip IVAR.GL 18 – for pipes 16–18 mm, anchor pin 18 mm, length 1 m
Code: 602000018Product detailed description
The strip IVAR.GL 18 (code 602000018) holds the pipes of the hydronic floor heating system on a smooth thermal insulation or concrete base plate and ensures that the loops maintain the required axis distance. It is suitable for pipes with an outer diameter of 16, 17 and 18 mm, which can be laid in intervals of 50, 100, 150, 200, 250 or 300 mm.
- material: glass fiber reinforced polyamide
- strip length: 1 m
- anchor pin length: 18 mm
Installation procedure
The manufacturer recommends first laying a separation embossed foil IVAR.FR or IVAR.FRO on smooth insulation boards, then fixing the mounting strips and finally placing the heating loops. For anchoring into smooth thermal insulation boards, the IVAR.PPA fixing pins are recommended, while screws or other anchoring material are used for concrete slabs.
The strip with a 40 mm pin is available under code 602000040 (IVAR.GL 40), and the self-adhesive version of IVAR.GL is available under code 602000017.
Technical parameters
| Code | 602000018 |
| Manufacturer | IVAR |
| Type | IVAR.GL 18 |
| Product type | pipe fixing strip |
| Pipe outer diameter | 16–18 mm |
| Laying spacing | 50, 100, 150, 200, 250, 300 mm |
| Anchor pin length | 18 mm |
| Strip length | 1 m |
| Material | polyamide with glass fibers |
| Base | smooth thermal insulation or concrete slab |
Frequently asked questions
What is the difference between IVAR.GL 18 and IVAR.GL 40?
They differ in the length of the anchor pin – IVAR.GL 18 (602000018) has a 18 mm pin, while IVAR.GL 40 (602000040) has a 40 mm pin. A self-adhesive version of IVAR.GL is also available (602000017).
For which pipes is the strip suitable?
For hydronic floor heating pipes with an outer diameter of 16, 17 or 18 mm. The pipes can be laid in intervals of 50, 100, 150, 200, 250 or 300 mm.
On which base is the strip anchored?
On a smooth thermal insulation or concrete slab. In insulation boards, it is anchored with IVAR.PPA fixing pins, while in concrete it is anchored with screws or other anchoring material.
Additional parameters
| Category: | accessories for system boards |
|---|---|
| Warranty: | 2 years |
| Availability: | In stock or at supplier |
| Code: | 602000018 |
| Manufacturer: | IVAR |
| Type: | IVAR.GL 18 |
| Product type: | pipe fixing rail |
| Pipe outside diameter: | 16–18 mm |
| Laying spacing: | 50, 100, 150, 200, 250, 300 mm |
| Anchor nail length: | 18 mm |
| Rail length: | 1 m |
| Material: | glass-fibre reinforced polyamide |
| Base: | smooth insulation or concrete board |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.