Pneumatic Actuator IVAR BRA.AP-40 – double-acting, 19 Nm

Code: AP040DA0QI2
Not rated Rating details
173,43 € –20 %
Pneumatický pohon IVAR BRA.AP-40 – dvojčinný, 19 Nm
173,43 € –20 % 138,74 € / pcs 112,80 € excl. VAT Measure price:
International delivery
To order (1-2 weeks)

Detailed information

Product detailed description

The actuator AP040DA0QI2 (type BRA.AP-40) is a double-acting rack-and-pinion pneumatic actuator for operating wafer butterfly valves and flanged or threaded ball valves. Its torque is 19 Nm at 8 bar and its rotation angle is 90° (quarter turn).

Function and construction

  • Double-acting version: when port A is supplied, the actuator turns counter-clockwise; when port B is supplied, it turns clockwise, while the other port is vented.
  • hard-anodised aluminium body, end caps with polyester coating
  • adjustable mechanical limit stops for the open and closed positions, fine-adjustment range ±5°
  • ISO 5211 flange for connection to the valve, polygonal bushing for the stem coupling
  • top flat interface to VDI/VDE 3845 (NAMUR) for a solenoid valve, limit switch boxes and positioners
  • visual position indicator

Operation

The actuator is intended for dry or lubricated compressed air at a pressure of PN 2 to PN 8; air filtration of 30 µm is recommended. It operates at -20 °C to +80 °C and can be mounted horizontally, vertically or at an angle. Do not use it with flammable, oxidising, corrosive, explosive or unstable media. Before selecting it, compare its torque with the torque required by the valve to be operated.

Technical data

CodeAP040DA0QI2
ManufacturerIVAR
TypeBRA.AP-40
Kindrack-and-pinion pneumatic actuator
Actiondouble-acting
Torque19 Nm (at 8 bar)
Rotation angle90°
Air pressurePN 2 to PN 8
Temperature range-20 °C to +80 °C
Mediumdry and lubricated compressed air
Connection to the valveISO 5211 flange
Accessory interfaceVDI/VDE 3845 (NAMUR)
Materialanodised aluminium

Frequently asked questions

What air and pressure does the actuator need?
Dry or lubricated compressed air at PN 2 to PN 8; the manufacturer recommends filtration to 30 µm. The stated torque of 19 Nm applies at 8 bar.

How does the BRA.AP-40 actuator move?
Double-acting version: when port A is supplied, the actuator turns counter-clockwise; when port B is supplied, it turns clockwise, while the other port is vented.

How is the actuator connected to the valve and accessories?
It is mounted on the valve through the ISO 5211 flange, and accessories (solenoid valve, limit switch box, positioner) are connected to VDI/VDE 3845 (NAMUR). Check suitability for a particular valve against the torque it requires.

Additional parameters

Category: stainless steel and flanged fittings
Warranty: 2 years
Code: AP040DA0QI2
Manufacturer: IVAR
Type: BRA.AP-40
Kind: rack-and-pinion pneumatic actuator
Action: double-acting
Torque: 19 Nm (at 8 bar)
Rotation angle: 90°
Air pressure: PN 2 to PN 8
Temperature range: -20 °C to +80 °C
Medium: dry and lubricated compressed air
Connection to the valve: ISO 5211 flange
Accessory interface: VDI/VDE 3845 (NAMUR)
Material: anodised aluminium

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.