PNI PSF6020A solar panel 60 W with 20 Ah battery and 12 V output for cameras

Product detailed description

The PNI PSF6020A is a 60 W solar panel with a built-in 20 Ah battery that powers a 12 V security camera even in places without mains electricity. The built-in battery can power the camera for up to 60 hours, so you are not left without power as soon as the sun is gone. The camera is not included in the package.

The monocrystalline panel charges the battery quickly. The charge level is shown by an LED on the metal bracket: it flashes red when the charge is below 25 % and lights green when the battery is full.

The package also includes a multifunctional bracket that can be fixed to a wall or a taller pole, and a camera support with several mounting options so that as many camera models as possible fit.

Installation and placement

The panel should be placed where the sun shines on it for as long as possible, facing south or southwest. The tilt angle and direction are set on the bracket. The dimensions are 355 × 530 × 200 mm and the weight is approximately 5.8 kg. The operating temperature is −26 to +80 °C.

The output is 12 V / 4 A, so check that the power consumption of your camera is within what the battery can handle.

Frequently asked questions

Is the camera included in the package?
No, only the panel with the battery and the bracket are sold.

How do I know whether the battery is charged?
By the LED on the bracket: red flashing means less than 25 %, steady green means a fully charged battery.

Where should I place it?
In a place with the best possible sunlight, facing south or southwest.

Technical specifications