PNI Safe House Kit 200 Set: Gas Detector and Electromagnetic Valve 3/4"
Code: PNI-SH200Product detailed description
The PNI Safe House Kit 200 is designed for households using gas and where you want to keep any potential leak under control. It consists of a gas detector and an electromagnetic (solenoid) valve. The detector evaluates the air in the room and triggers an alarm in case of dangerous concentration; the valve on the gas connection is then able to cut off the gas supply. Both devices are sold together and the power and connecting cables are part of the package.
According to the manufacturer's technical data, the detector reacts to natural gas and LPG (liquefied petroleum gas); carbon monoxide (CO) is also mentioned in the product description. The gas density level at which the alarm is triggered ranges from 0.1 % to 0.5 %.
Main Features
- complete set: gas detector and solenoid valve in one package
- audible alarm with siren of ≥ 85 dB / m
- LEDs on the front panel that signal not only the alarm but also other device functions
- valve closure by current impulse or manually, in less than 1 second
- operation only indoors at humidity ≤ 95 %
- white rounded edges and a design suitable for wall mounting
Acoustic and Visual Warning
The detector alerts to danger in two ways at once. In case of alarm, a sharp acoustic signal sounds and at the same time the LEDs on the front of the housing light up, so you can detect the leak both by hearing and sight. The LEDs not only signal the alarm, but also show other device statuses.
Technical Data
| Manufacturer | PNI |
| Product Code | PNI-SH200 |
| Detectable Gases | natural gas, LPG, petroleum gas |
| Detector Power Consumption | maximum 3 W |
| Operating Conditions | only indoors, humidity ≤ 95 % |
| Power Supply | 230 V |
| Output Voltage for Valve | 9 – 12 V |
| Gas Density Level for Alarm | 0.1 % – 0.5 % |
| LEL (Lower Explosive Limit) | 20 % |
| Siren Loudness | ≥ 85 dB / m |
| Detector Dimensions | 115 x 72 x 41 mm |
| Valve Closure Mode | current impulse or manually |
| Closure Voltage | DC 9 ~ 12 V (impulse) |
| Closure Time | less than 1 second |
| Connection (Thread) | 3/4" internal thread |
| Maximum Pressure | 100 kPa |
| Valve Material | brass and other alloys |
| Valve Operating Temperature | -26 °C ~ +60 °C |
| Connecting Cable Length | 90 cm |
Usage and Installation
The detector is designed for wall mounting and is suitable exclusively for indoor use. The valve is connected via a 3/4" internal thread and is intended for a maximum pressure of 100 kPa. Therefore, the installation of the valve into the gas supply should be entrusted to a qualified professional and after installation, always check the tightness of the connections and the function of the alarm.
Frequently Asked Questions
What is included in the package?
You will find a gas sensor and a solenoid valve in the package. The power and connecting cables are included.
How quickly does the valve close the gas supply?
The closure time is less than 1 second. The valve is closed by a current impulse from the detector or manually.
Documents for Download
Additional parameters
| Category: | detectors |
|---|---|
| Weight: | 0.641 kg |
| EAN: | 5949066500572 |
Product rating
Be the first who will post an article to this item!
Discussion
List of discussions
Costin
ATRIASHOP.RO