IVAR.TERMO TOP MAT underlay mat 600 × 1200 × 4 mm – dry system for underfloor heating

Code: F-068462
Not rated Rating details
30,14 € –20 %
Podkladová rohož IVAR.TERMO TOP MAT 600 × 1200 × 4 mm – suchý systém podlahového vykurovania
30,14 € –20 % 24,11 € / pcs 19,60 € excl. VAT Measure price:
International delivery
To order (1-2 weeks)

Detailed information

Product detailed description

The IVAR.TERMO TOP MAT mat (code F-068462), measuring 600 × 1200 mm and 4 mm thick, is laid indoors on the insulation boards of a dry hot water underfloor heating system. It evens out stress between the base and the final floor covering while also damping impact sound.

  • Five layers made of a blend of synthetic fibres, impact sound reduction up to 13 dB
  • Thermal resistance 0.042 m²K/W and conductivity 0.095 W/mK, so heat transfer stays effective
  • Compressive strength 590 kPa, reaction to fire class E, low emissions EC1 PLUS
  • Intended for ceramic tile and natural stone finishes

The mat is bonded with flexible adhesive to the surface of the system insulation boards; once the levelling compound has set, the two form a continuous base for the floor covering. Before installation, make sure the load-bearing floor structure is as stable as possible – ceiling deflection increases noise transmission and vibration.

Technical data

CodeF-068462
ManufacturerIVAR
TypeIVAR.TERMO TOP MAT
Dimensions600 × 1200 mm
Thickness4 mm ± 0.3
Number of layers5
Impact sound reductionup to 13 dB
Thermal resistance0.042 m²K/W
Thermal conductivity0.095 W/mK
Compressive strength590 kPa
EmissionsEC1 PLUS
Reaction to fireclass E

Frequently asked questions

How is the mat fixed?
It is glued with flexible adhesive to the surface of the system insulation boards.

Which floor coverings is it intended for?
Ceramic tile or natural stone, indoors, in dry-system hot water underfloor heating.

How much does it reduce impact sound?
According to the technical data sheet, by up to 13 dB.

Additional parameters

Category: accessories for system boards
Warranty: 2 years
Code: F-068462
Manufacturer: IVAR
Type: IVAR.TERMO TOP MAT
Dimensions: 600 × 1200 mm
Thickness: 4 mm ± 0.3
Number of layers: 5
Impact sound reduction: up to 13 dB
Thermal resistance: 0.042 m²K/W
Thermal conductivity: 0.095 W/mK
Compressive strength: 590 kPa
Emissions: EC1 PLUS
Reaction to fire: class E

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.