90° transition elbow in AISI 304 stainless steel with female thread IVAR.IVN430 15 mm – Rp 1/2″

Code: IVN430.1512
Not rated Rating details
16,73 € –20 %
Prechodové koleno 90° z nerezu AISI 304 s vnútorným závitom IVAR.IVN430 15 mm – Rp 1/2″
16,73 € –20 % 13,38 € / pcs 10,88 € excl. VAT Measure price:
International delivery
To order (1-2 weeks)

Detailed information

Product detailed description

The IVAR.IVN430 elbow (IVN430.1512) changes direction by 90° and connects 15 mm pressed pipe through its female thread Rp 1/2″ to valves or fittings with a male thread. The AISI 304 stainless-steel system with an EPDM seal is intended for closed heating and cooling circuits, solar systems, compressed-air and vacuum systems, inert and technical gases, technical liquids, industrial applications, and waste and rain water.

Technical data

  • Pipe size: 15 mm
  • Thread: Rp 1/2″
  • Joint type: pressing (PRESS)
  • Material: stainless steel AISI 304 (1.4301), EPDM seal
  • Nominal pressure: PN 16
  • Temperature range: −20 … +85 °C, max. +120 °C
  • Max. vacuum: −0.8 bar
  • Antifreeze mixture: max. 50 %
  • Drinking water: not suitable

The joint is made by mechanical pressing (M-contour press jaws). The fitting is not suitable for drinking water. Have the installation and commissioning carried out by a qualified contractor.

Technical data

CodeIVN430.1512
ManufacturerIVAR
TypeIVAR.IVN430
Pipe size15 mm
ThreadRp 1/2″
Joint typepressing (PRESS)
Materialstainless steel AISI 304 (1.4301), EPDM seal
Nominal pressurePN 16
Temperature range−20 … +85 °C, max. +120 °C
Max. vacuum−0.8 bar
Antifreeze mixturemax. 50 %
Drinking waternot suitable

Frequently asked questions

Is this fitting suitable for drinking water?
No. The manufacturer states explicitly that the AISI 304 stainless system is not suitable for drinking water; it is meant mainly for heating, cooling, solar circuits and technical pipework.

What happens if the joint is not pressed?
An unpressed joint is not tight. Up to size 54 mm the manufacturer specifies a pressing indicator that shows a correctly made joint.

What thread and pipe size does IVN430.1512 have?
A pressing end for 15 mm pipe and female thread Rp 1/2″.

Additional parameters

Category: IVAR.IVN30, IVN31, IVN34 - elbows 90° with threads
Warranty: 2 years
Code: IVN430.1512
Manufacturer: IVAR
Type: IVAR.IVN430
Pipe size: 15 mm
Thread: Rp 1/2″
Joint type: pressing (PRESS)
Material: stainless steel AISI 304 (1.4301), EPDM seal
Nominal pressure: PN 16
Temperature range: −20 … +85 °C, max. +120 °C
Max. vacuum: −0.8 bar
Antifreeze mixture: max. 50 %
Drinking water: not suitable

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.