Transition elbow 90° with female thread IVAR.IVN482 – stainless steel AISI 304, 22 mm, Rp3/4"

Code: IVN482.2234
Not rated Rating details
23,49 € –20 %
Prechodový oblúk 90° s vnútorným závitom IVAR.IVN482 – nerez AISI 304, 22 mm, Rp3/4"
23,49 € –20 % 18,79 € / pcs 15,28 € excl. VAT Measure price:
International delivery
To order (1-2 weeks)

Detailed information

Product detailed description

Transition elbow 90° with female thread IVAR.IVN482 is a press fitting made of AISI 304 stainless steel for 22 mm pipe. Connection: press end 22 mm, female thread Rp3/4".

Where it is used

Use: closed heating and cooling circuits, solar systems, compressed air and vacuum systems, inert and technical gases, technical liquids, industrial applications, waste water and rainwater. The AISI 304 stainless steel system is not suitable for drinking water.

Dimensions and connection

  • Pipe diameter: 22 mm
  • press end 22 mm, female thread Rp3/4"
  • Dimension L1: 68 mm
  • Dimension L: 61 mm
  • Dimension Z: 38 mm

Installation

For 22 mm pipe, single-piece press jaws with the M profile are used. Cut the pipe square, deburr it inside and out, push it in up to the stop and mark the insertion depth. Wet the O-ring with water only, never with oil or grease, and press each joint just once. Have the installation done by a qualified contractor and follow the IVAR.PRESS system manual.

Technical data

CodeIVN482.2234
ManufacturerIVAR
TypeIVAR.IVN482
Product kindTransition elbow 90° with female thread
Pipe diameter22 mm
ThreadRp3/4"
Dimension L168 mm
Dimension L61 mm
Dimension Z38 mm
Materialstainless steel AISI 304 (1.4301)
SealO-ring EPDM
Max. pressurePN 16
Temperature-20 to +120 °C
Press jawsM profile, single-piece

Frequently asked questions

What are the dimensions and connection of IVN482.2234?
Connection: press end 22 mm, female thread Rp3/4". Dimensions according to the manufacturer's data sheet: L1 = 68 mm, L = 61 mm, Z = 38 mm.

Can IVN482.2234 be used for drinking water?
No. The AISI 304 stainless steel system is intended for heating, cooling and technical lines, not for drinking water.

Which press jaws are used for IVN482.2234?
For 22 mm pipe, single-piece press jaws with the M profile are used.

Additional parameters

Category: IVAR.IVN82, IVN83 - bends 90° with threads
Warranty: 2 years
Code: IVN482.2234
Manufacturer: IVAR
Type: IVAR.IVN482
Product kind: Transition elbow 90° with female thread
Pipe diameter: 22 mm
Thread: Rp3/4"
Dimension L1: 68 mm
Dimension L: 61 mm
Dimension Z: 38 mm
Material: stainless steel AISI 304 (1.4301)
Seal: O-ring EPDM
Max. pressure: PN 16
Temperature: -20 to +120 °C
Press jaws: M profile, single-piece

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.