Pre-assembled backflow preventer unit BRA.ECO 3T RAMPA T – 2", L = 781 mm
Code: RAMPAT200Product detailed description
What the unit includes
- BRA.ECO 3T backflow preventer with a controllable reduced-pressure zone (type BA)
- two spring-loaded check valves with a chamber between them holding a relief valve that isolates the supply network from the user network on backflow
- ball valves and a filter in one pre-assembled unit, overall length 781 mm
Data and use
- threaded connection 2" (ISO 228/1), PN 10, temperature 0 to 65 °C
- body and upper cover in bronze, EPDM seals
- drinking-water protection up to category 4 under EN 1717; not suitable for category 5
- thanks to its design, also suitable for fire-fighting networks with an operating pressure of up to 12 bar
The backflow preventer is installed in an accessible, ventilated room with no risk of flooding. A filter must be fitted upstream, and shut-off valves before and after it for servicing. Installation should be carried out by a qualified person.
Technical data
| Code | RAMPAT200 |
| Manufacturer | IVAR |
| Type | BRA.ECO 3T RAMPA T |
| Thread size | 2" |
| Face-to-face length | 781 mm |
| Max. pressure | PN 10 |
| Medium temperature | 0 to 65 °C |
| Body material | bronze |
| Seals | EPDM |
| Protection category | up to category 4 (EN 1717) |
Frequently asked questions
What kind of water is the backflow preventer suitable for?
It protects drinking water against contamination up to category 4 under EN 1717. It is not intended for category 5 water (microbiological or viral risk), where separation by an air gap is required.
What pressure and temperature can it withstand?
The maximum working pressure is PN 10 and the medium temperature 0 to 65 °C. According to the manufacturer, its design also makes it suitable for fire-fighting networks up to 12 bar.
What must be provided upstream of and around the backflow preventer?
A filter must be fitted upstream, with shut-off valves before and after for servicing, and enough space must remain around the unit for installation, removal and inspection. This unit already includes ball valves and a filter.
Additional parameters
| Category: | BRA.ECO 3F, 3T - Backflow preventers |
|---|---|
| Warranty: | 2 years |
| Code: | RAMPAT200 |
| Manufacturer: | IVAR |
| Type: | BRA.ECO 3T RAMPA T |
| Thread size: | 2" |
| Face-to-face length: | 781 mm |
| Max. pressure: | PN 10 |
| Medium temperature: | 0 to 65 °C |
| Body material: | bronze |
| Seals: | EPDM |
| Protection category: | up to category 4 (EN 1717) |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
