PRESS Insert IVAR.MP 5736 15x20/2 – transition from ALPEX 20x2 pipe to Cu / C-STEEL tube Ø 15 mm
Code: 512115MPCProduct detailed description
The insert IVAR.MP 5736 in size 15x20/2 (code 512115MPC) connects two crimping systems: on one side a multi-layer pipe ALPEX 20x2, on the other a copper or carbon steel pipe IVAR.C-STEEL with an outer diameter of 15 mm. Both sides are connected by crimping, so the transition does not require an intermediate threaded piece.
- ALPEX 20x2 side: crimping pliers with contour B, BE, TH, F, H, R or U
- Cu / C-STEEL Ø 15 mm side: crimping pliers with contour M, V or SA
- max. operating pressure PN 10, max. temperature +100 °C
- body made of nickel-plated brass CW617N, sleeve made of stainless steel, sealing material EPDM
The insert is used wherever ALPEX pipe meets copper or steel crimped pipe in one distribution system. Crimp each side with the pliers of the correct profile and size; cut the ALPEX pipe perpendicularly before sliding it on, calibrate and remove any burrs.
Technical parameters
| Code | 512115MPC |
| Manufacturer | IVAR |
| Type | IVAR.MP 5736 |
| Type | ALPEX – Cu / C-STEEL crimping insert |
| Size | 15x20/2 |
| ALPEX side | 20x2 mm |
| Cu / C-STEEL side | Ø 15 mm |
| Crimp pliers – ALPEX side | B, BE, TH, F, H, R, U |
| Crimp pliers – Cu / C-STEEL side | M, V, SA |
| Max. pressure / temperature | PN 10 / +100 °C |
| Material | nickel-plated brass CW617N, stainless steel sleeve, EPDM sealing |
Frequently asked questions
Which pipes does the insert 15x20/2 connect?
On one side a multi-layer pipe ALPEX 20x2, on the other a copper or IVAR.C-STEEL pipe with an outer diameter of 15 mm.
Which crimping pliers are needed?
The ALPEX side is crimped with pliers of contour B, BE, TH, F, H, R or U, the copper or steel side with contour M, V or SA – always in the size corresponding to the respective pipe.
What are the operating limits of the connection?
The insert is suitable for an operating pressure up to 10 bar (PN 10) and a temperature up to +100 °C. The body is made of nickel-plated brass CW617N, the sleeve of stainless steel and the sealing material of EPDM.
Additional parameters
| Category: | straight press couplings - copper |
|---|---|
| Warranty: | 2 years |
| Availability: | In stock or at supplier |
| Code: | 512115MPC |
| Manufacturer: | IVAR |
| Type: | IVAR.MP 5736 |
| Product type: | press nipple ALPEX – Cu / C-STEEL |
| Size: | 15x20/2 |
| ALPEX side: | 20x2 mm |
| Cu / C-STEEL side: | Ø 15 mm |
| Press jaws – ALPEX side: | B, BE, TH, F, H, R, U |
| Press jaws – Cu / C-STEEL side: | M, V, SA |
| Max. pressure / temperature: | PN 10 / +100 °C |
| Material: | nickel-plated brass CW617N, stainless sleeve, EPDM seal |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.